|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
55 members (amc252, Adam Reynolds, AWilley, AJMurphy, Barry_Braksick, AlkansBookcase, APianistHasNoName, Carey, 9 invisible),
1,795
guests, and
228
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
With the help of carboard, I have managed to restore the badly-sounding strings. I want to thank Maxim for his gratuitous assistance. I am very touched by your message. It turns out my counsel to help people "to treat their own piano". I hope that you will be have the new adherents of the method. Very nice that "foot wrap" works on the banks of the Neva. I'm wish you Good luck in this difficult matter. Ignore the non-constructive criticism of the method. Write about the problems and any things encountered when installing a the corrugated cardboard shim on russian. Read in detail the technology at the site http://www.donguluk.ucoz.ru/ and watch my movies. Sincerely yours,maxim_tuner
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Also the technique provided is wrong (not taking out the coils) , and the man ininterested in learning any better.
Kamin, maybe I misunderstood you understand, but I insist that the coil can not be removed. Let the pin partially be scratched in process by screwing, but serious problems do not arise . If you remove the coil, you'll never pull it back to the pin. Especially it hard to make in (3)octave. Conclusion: Do not to remove it's!
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
So... no more comments necessary (he likes to be taken for a genious, as too. Kamin,you are wrong. What his genius? if Max does not have special education. He hardly ever learn to make correct temperament due to own age and lack of good teachers. He is an old man shabby life is only lazy people do not spit in his face! All he has is a complete lack of understanding surrounding is the issue of public censure and all its negative manifestations. What do them to drive? It is the desire of several people around the world which make test tight pin by his method
|
|
|
|
Joined: Nov 2010
Posts: 5,998
5000 Post Club Member
|
5000 Post Club Member
Joined: Nov 2010
Posts: 5,998 |
Does anyone else get the feeling they are reading a discussion done through a Google translator?!
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
to change a tuning pin I take out the coil by opening it with a screwdriver after 3/4 turn back) then I put it back and hope the becket will not break.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
but basically, as long you have a minimal torque (the tuning pin does not twist back by itself) you can manage the pin so it stay . it is called setting the pin and Max at 40 years is too old to learn that (I believe I understand it all at 50 so there is possiblvy some hope for the Max of this world)
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Jun 2006
Posts: 1,740
1000 Post Club Member
|
1000 Post Club Member
Joined: Jun 2006
Posts: 1,740 |
Tu n'est pas gentil Isaac, je crois que Max fait de son mieux. En même temps, il me tape sur les nerfs.
À cause des langues, mauvaises traductions etc...nous ne comprenons pas toujours ses intentions. Tu es d'accord?
Peut-être tu pourrais mieux t'exprimer, avec concision, sur ce forum.
J'aimerais mieux te lire en français que d'essayer de déchiffrer ton anglais.
C'est souvent une diahrée de mots avec une constipation d'idée.
J'aimerais te rencontrer en personne. Si tu viens au Canada, je t'accueillerais avec plaisir.
J'ose croire que je serai en France bientôt, pour jouer de la musique. Peut-être nous pourrons jaser?
Bonne soirée.
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Bonjour , je trouve que j ai ete assez gentil, il ne veut pas apprendre, au pretexte que ses clients ne peuvent le payer correctement. Je n approuve pas cette attitude, c est tout. Ce qui m enerve c est qu il ne veut pas apprendre et propose fierement ses methodes. Quand je pense que son pere construisait des avions, niveau technologie on en est tres loin.
Pour mon anglais il est surement assez mauvais mais on ne parle pas philosophie, j essaye de faire profiter de ce que j ai pu comprendre, ca marche un peu sur les pieds des maitres auto proclames, mais certains parviennent a comprendre tt de meme il me semble.
Avec plaisir si tu viens a Paris previens moi. Tu dois jouer ou ? Je travaille avec certains loueurs de pianos, c est possible que ce soit la ou tu vas jouer...
Ps a priori tout ca m amuse, seule la betise et le manque d humilite m ennervent !
Bien cordialement
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Also the technique provided is wrong (not taking out the coils) , and the man ininterested in learning any better.
Kamin, maybe I misunderstood you understand, but I insist that the coil can not be removed. Let the pin partially be scratched in process by screwing, but serious problems do not arise . If you remove the coil, you'll never pull it back to the pin. Especially it hard to make in (3)octave. Conclusion: Do not to remove it's! You need round nose pliers to hold the opened coil with some tension , orient the pin in front of the becket and put it back in the hole. Same method than when changing a string and making the coils on a dummy/spare pin , as it is done to avoid heating the pin. Those things are known and documented since 20 years. You may even find now youtube videos.
Last edited by Kamin; 07/10/12 10:28 PM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Does anyone else get the feeling they are reading a discussion done through a Google translator?! ando,pardon but we have to talk like that. Indeed, I think that my writings can be scary for someone and like parody incorrect English speech. However, thanks to (Google translator) and the huge tolerances of participant our forum many people see my movies around the world and they to writes letters for me. Most of the letters addressed to me from people which have interest about details the technology process (as to set shim). Once again sorry for bad english. Sincerely yours,maxim_tuner
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Tu n'est pas gentil Isaac, je crois que Max fait de son mieux. En même temps, il me tape sur les nerfs.
À cause des langues, mauvaises traductions etc...nous ne comprenons pas toujours ses intentions. Tu es d'accord?
accordeur,Peut-être vous avez raison, je et de se comporter avec plus de persistance dans ce forum. Toutefois, si vous n'êtes pas heureux de lire mon opus, c'est votre droit. Je crois que le joint en carton ondulé offre de friction. Dans l'avenir, ne pense pas que le droit de refuser cette méthode. Je ne peux pas trahir ses disciples. Désolé si mes paroles ont exprimé, ou mal traduit en quelque sorte pourrait vous blesser. Nous serons tolérants les uns des autres. Sincèrement, maxim_tuner
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Bonjour , je trouve que j ai ete assez gentil, il ne veut pas apprendre, au pretexte que ses clients ne peuvent le payer correctement. Je n approuve pas cette attitude, c est tout. Ce qui m enerve c est qu il ne veut pas apprendre et propose fierement ses methodes. Quand je pense que son pere construisait des avions, niveau technologie on en est tres loin.
Kamin,vous avez tort! J'aime vraiment je suis en train d'apprendre quelque chose de nouveau voulez associer à la configuration du piano. Je n'ai même pas pensé il ya ce qu'il ya un lien entre les réalisations de mon père (concepteur d'avion) et ma réticence à apprendre. Vous n'avez pas besoin de considérer ma méthode comme une sorte de caprice . Je suis calme comme jamais. Je ne veux pas d'atteinte à la dignité des autres maîtres, mais beaucoup d'entre eux ont tort quand ils parlent de mon invention peu. Prouver que cela ne fonctionne pas je vais manger leur chapeau ! Avec nos meilleures salutations et mes meilleurs vœux,
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
and so says the frenchman, bravo!
|
|
|
|
Joined: Jun 2011
Posts: 824
500 Post Club Member
|
500 Post Club Member
Joined: Jun 2011
Posts: 824 |
For goodness sake MAX .... we know you both favour, and advocate the use of cardboard to tighten loose wrestpins, but is there any need to go on and on about it? It seems that you are using this forum as a means of self-promotion rather than any intention to heed advice or educate yourself in the necessary skills of tuning.
We know exactly where you stand ... there is little point in labouring the subject, I suggest you concentrate on learning to tune.
If you really want to be taken seriously, and wish to post videos, then I suggest the subjet matter should refer to tuning improvement rather than cardboard.
Not only are you letting yourself down, but I feel that you are letting down those who were extremely generous in sending you various tools and other items to help you along the pathway of improvement.
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
but I feel that you are letting down those who were extremely generous
Johnkie, no need to interfere the fresh with a sour.(Мешать киÑлое Ñ Ð¿Ñ€ÐµÑным). I do not advertise themselves here on the forum. That you know perfectly well and consciously put the question to humiliate my human dignity. I already told you that do not need your advice, but now I have your answer. 1 I did not started a topic but Loren D 2 I'm reading your note now and learn how I did not have the opportunity to learn throughout their entire adult life. I'm learning a lot now 3 I never have no words, none of my act does not diminish the dignity of every human being. Why do you say I humiliate somebody ("I feel that you are letting down those who were extremely generous") members of the Forum by their speeches? It is a complete lie! I am grateful to all participants for any advice. And also for the assistance tools and books even more grateful them. Are you once said on the British forum about me: "Him (maxim_tuner_bodger) does not need help . Or do you forget? 4 I would be happy not to respond to attacks on my personal address is and how you notice and I don't would wrote a theme ... But so far no one has written: "It does not work and allow me publicly the evidence base of my experiments Here ." And we would really put the bullet on this topic. But ...
|
|
|
|
Joined: Jul 2012
Posts: 11
Junior Member
|
Junior Member
Joined: Jul 2012
Posts: 11 |
Hi everbody. I can see that the debate has moved on as who knows how to speak. And it is not good friends. After all, we are gathered here not to discuss the language of communication.
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
After all, we are gathered here not to discuss the language of communication. Alexandr,you're right we are all here to either bury the corrugated cardboard shim and hammering an aspen stake on it's grave, or use it for other purposes. I hope that the language barrier is not a reason for personal animosity members of our forum. Only the truth us will judge in future
Last edited by Maximillyan; 07/12/12 08:32 AM.
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
i welcome any lines in this hot topic. Do not fear if it's chinese hieroglyphs
Last edited by Maximillyan; 07/12/12 08:36 AM.
|
|
|
|
Joined: Jul 2012
Posts: 11
Junior Member
|
Junior Member
Joined: Jul 2012
Posts: 11 |
I worked on the railroad assistant engineer. And that such methods are always rescued us in case of failure. Of course, I understand that here we are talking about the piano, but my friends let us dwell on the fact that in any of the methods are effective and efficient if they yield the correct result and leave no bad effects, as I wrote above. For example, you are in the math lesson and the teacher suggested to you to solve the problem. Someone decides to one, the way someone else, but the main thing that they have come to the RIGHT answer.
|
|
|
Forums43
Topics223,392
Posts3,349,310
Members111,634
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|