Welcome to the Piano World Piano Forums Over 2.5 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers
It's Fun to Play the Piano ... Please Pass It On!
Need help- have a piano outside- YES, they kept it OUTSIDE!!!!!
It is sooo dilapidated, Im afraid to even give it away for free, as someone might even get hurt taking it down 2 flights of stairs! I figure, I can take an ax, chop up the wood (I can do this easily- I saw similar technique used by Jack Nicholson in "The Shining"). Then, the hard part- cut the harp in 3 pieces, so it is manageable.
Big question: easiest way to cut up the harp, and is it worth any $ for a recycling place to pick it up?
Loc: Queensland, Australia
Take the action and keyboard out, remove the lid, front and back - that's a bit of the weight gone.
But the strings need to be treated with respect. I had a "friend" decided that he'd just snip them at each end. WRONG - the first one snapped back and attacked him. Hopefully a technician will chime in with the right way to remove strings.
Alan from Queensland, Australia (and Clara - my Grotrian Concert) & 2 Allen Organs [long story] - MDS312 and CF-15.
Big Thanks, people. Good tip on not cutting strings! Whew. Now, Rod, should I try calling a scrap yard and describe what I have for them? Im in Los angeles.....Is there a real demand for cast iron scrap? Not sure , but I imagine theres got to be nickel on those pins too....
Loc: Grand Rapids Michigan
As a piano technician, the most fun I ever had was smashing a couple of old uprights that were totally shot, completely apart with a sledge hammer!!!! Oh man what fun that was!!!!! In my younger years, of course... Instead of fixing them, smash them. Woo hooooo!!
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.com
You will not get rich selling scrap iron these days.
Not sure if you got where In coming from, but Im not wanting to get rich, or even to get paid a dollar- I wish to have it taken away as an exchenge for the scrap value a scrap yard might see in it,thats all. The point of me asking was IF its worth something to one of those guys, I have hope that they wil take it from me foe NO charge, and simultaneously theyd get scrap enough to pay for their gas and some $ left over to fill their gas tank.
If its NOT worth anything, then I appreciat that- just want to be aware of it in case I have to pay to have it taken away, which I would no problem. I understand those people have to make a few $ on a haul......
Loc: Philadelphia/South Jersey
This video was only taken with a phone, so it isn't the best of quality. However, it shows the unfortunate reality of what we must do with some pianos.
Rich Galassini Cunningham Piano Co. Phila, Pa. email@example.com Check out the Science Channel's "How Its Made" featuring our piano restoration: www.cunninghampiano.com/restorations/
Originally Posted By: pippo
I figure, I can take an ax, chop up the wood (I can do this easily- I saw similar technique used by Jack Nicholson in "The Shining").
What you can't see in the video, and what is vitally important is this: make sure you keep your wrists loose. Proper technique is everything.
On reselling, I doubt you'd get much for scrap.. not enough to have it picked up anyway. When I was consulting in the business, scrap metal went for around $0.09/lbs. Even if you have 500 pounds of iron in there, that's only $45 worth of iron. So, I doubt you'd get someone to pick it up, but then, I honestly could be wrong. Might be worth a call or two to local scrap yards?
Every day we are afforded a new chance. The problem with life is not that you run out of chances. In the end, what you run out of are days.