|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
65 members (BWV846, Animisha, benkeys, Anglagard44, brdwyguy, amc252, 16 invisible),
2,282
guests, and
418
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
I've seen this question posed, but I've never seen an answer. Does anyone know when Steinway changed from Adirondack spruce to Sitka spruce for soundboards?
Anne'sson El Paso, TX
|
|
|
|
Joined: Jun 2003
Posts: 32,060
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Jun 2003
Posts: 32,060 |
If you cannot hear the difference, why would it matter to you?
Semipro Tech
|
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
Anne'sson El Paso, TX
|
|
|
|
Joined: May 2012
Posts: 7,439
7000 Post Club Member
|
7000 Post Club Member
Joined: May 2012
Posts: 7,439 |
You might contact S&S-NY directly. They are always very helpful.
Marty in Minnesota
It's much easier to bash a Steinway than it is to play one.
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
I would presume that once other makers became interested in west coast timber most followed suit. I would think it has been in the last fifty-sixty years…since the early sixties or seventies…
Maybe earlier if the Adirondack supply became unreliable because of overcutting. Really doesn’t matter just play and be happy the piano has soundboard worth vibrating…..
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
I think they got their lumber from N. Hudson Woodcraft. Here's some interesting lore on their site. http://www.northhudsonwoodcraft.com/aboutus.htm(NH Woodcraft is where I got my soundboard wood back in the '70s and '80s)
Last edited by kpembrook; 01/01/13 07:29 PM.
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
Same here. it was the late John Ford that turned me onto N. Hudson.
|
|
|
|
Joined: Apr 2007
Posts: 3,332
3000 Post Club Member
|
3000 Post Club Member
Joined: Apr 2007
Posts: 3,332 |
David Kirkland is probably the best person to ask at Steinway. He's very knowledgeable about Steinway history. DKirkland@steinway.com
|
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
Thanks for all the leads! Yes, I am happy with the sound of my piano--it's really amazing for a small grand from 1939. It would sound good no matter what it's made of. But I am interested in everything connected with its history.
Anne'sson El Paso, TX
|
|
|
|
Joined: May 2012
Posts: 7,439
7000 Post Club Member
|
7000 Post Club Member
Joined: May 2012
Posts: 7,439 |
Steinway can supply the history as far as year of manufacture, delivery date, original owner, and style and original finish. The only thing you need is the SN. The charge is $25.00 and you receive a very nice presentation. As a Steinway owner, you are entitled to receive a free subscription to the S&S Magazine.
One of the perks of owning the best.
(I'll duck and cover, now!)
Marty in Minnesota
It's much easier to bash a Steinway than it is to play one.
|
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
Thanks, Marty. I already got the information re date of manufacture etc. from Panni Talmadge. My mother was the original owner.
Anne'sson El Paso, TX
|
|
|
|
Joined: May 2012
Posts: 31
Full Member
|
Full Member
Joined: May 2012
Posts: 31 |
1896 Grand Piano Chickering and Sons 110b Should i replace the original soundboard, it has lost its crown an is NOT SINGING very well. If i just repaint the harp repair the board and redo the action, This piano will still not sound very good correct???
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
1896 Grand Piano Chickering and Sons 110b Should i replace the original soundboard, it has lost its crown an is NOT SINGING very well. If i just repaint the harp repair the board and redo the action, This piano will still not sound very good correct??? What does this have to do with the topic of this thread? How about posting a new topic?
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: Oct 2012
Posts: 1,036
1000 Post Club Member
|
1000 Post Club Member
Joined: Oct 2012
Posts: 1,036 |
According to the book "Piano: The Making of a Steinway Concert Grand" by James Barron," p. 79, Steinway made their soundboards of eastern white spruce until the 1920s.
phacke
Steinway YM (1933) ...Working on: J. S. Bach, Toccata (G minor) BWV 915 (and trying not to forget the other stuff I know)
|
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
Anne'sson El Paso, TX
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
I would presume that once other makers became interested in west coast timber most followed suit. I would think it has been in the last fifty-sixty years…since the early sixties or seventies…
Maybe earlier if the Adirondack supply became unreliable because of overcutting. Really doesn’t matter just play and be happy the piano has soundboard worth vibrating…..
This is anyway an interesting question, and eventually can be related to some tone characteristics we hear, but this is about soundboards that are now very old. I discovered that most of the decisions taken was often because of the nonavailability of the part or material, of course looking for the better is part of the building process but if this implies more than minor problems the test is stopped soon. Could be that the tree went ill, that the cost was too high, that the Sitka was prooved to be really better. The dates should be of some interest anyway...
Last edited by Kamin; 01/02/13 01:01 PM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Nov 2012
Posts: 195
Full Member
|
OP
Full Member
Joined: Nov 2012
Posts: 195 |
Marty, you were right that Steinway is very helpful. And Ryan, David Kirkland did get right back to me. According to David, they don't have an answer "at their fingertips" but "probably" the answer is at the end of WW2 because Adirondack spruce was used for gliders in the war. Steinway of course was one of the companies making those gliders.
So putting together the statement from Barron's book and the communication from David Kirkland, the question is still unresolved. It seems possible to me that Steinway could have been using both eastern spruce and western spruce up until WW 2-- possibly the bellyman picked whatever looked good and sounded good for individual instruments.
Anne'sson El Paso, TX
|
|
|
|
Joined: Sep 2003
Posts: 5,534
5000 Post Club Member
|
5000 Post Club Member
Joined: Sep 2003
Posts: 5,534 |
I would presume that once other makers became interested in west coast timber most followed suit. I would think it has been in the last fifty-sixty years…since the early sixties or seventies…
Maybe earlier if the Adirondack supply became unreliable because of overcutting. Really doesn’t matter just play and be happy the piano has soundboard worth vibrating….. In all probability, earlier. When the meetings of piano makers were being held that resulted in the book Piano Tone Building—i.e., from 1916 to 1919—there was already pressure on both the Adirondack (red) spruce and the Eastern (white) spruce forests. Attitudes among these men varied but in general they were of the opinion that, like ivory (there are plenty of elephants in Africa and India, just kill more of them), there were still adequate supplies of spruce (there are plenty of trees around, just cut more of them). Estimates varied but in general they looked forward to at least “two generations†worth of trees remaining. There was no discussion about doing anything to ensure a steady supply of trees for the future; that was a task for “governments.†Posey Manufacturing of Hoquiam, Washington started supplying both Sitka spruce lumber and glued-up soundboard panels to the industry in 1909 or 1910. By the 1920s it was a large and thriving manufacturing company so it must have been supplying lumber and/or soundboard panels to quite a few different pianomakers. ddf
Delwin D Fandrich Piano Research, Design & Manufacturing Consultant ddfandrich@gmail.com (To contact me privately please use this e-mail address.)
Stupidity is a rare condition, ignorance is a common choice. --Anon
|
|
|
|
Joined: May 2001
Posts: 1,633
1000 Post Club Member
|
1000 Post Club Member
Joined: May 2001
Posts: 1,633 |
I tune pianos in and around Dolgeville, New York, as that is part of my service area. I live about 30 minutes from Dolgeville. It's a beautiful area!
Anyway...this is purely anecdotal, but I'll still tell it. I once tuned an early 1970's Steinway "M" grand about 15 miles outside of Dolgeville. The owner, who bought the piano new, told me that "he" was told the soundboard was a North Hudson soundboard.
Eric Gloo Piano Technician Certified Dampp-Chaser Installer Richfield Springs, New York
|
|
|
|
Joined: Mar 2008
Posts: 4,263
4000 Post Club Member
|
4000 Post Club Member
Joined: Mar 2008
Posts: 4,263 |
I would presume that once other makers became interested in west coast timber most followed suit. I would think it has been in the last fifty-sixty years…since the early sixties or seventies…
Maybe earlier if the Adirondack supply became unreliable because of overcutting. Really doesn’t matter just play and be happy the piano has soundboard worth vibrating….. In all probability, earlier. When the meetings of piano makers were being held that resulted in the book Piano Tone Building—i.e., from 1916 to 1919—there was already pressure on both the Adirondack (red) spruce and the Eastern (white) spruce forests. Attitudes among these men varied but in general they were of the opinion that, like ivory (there are plenty of elephants in Africa and India, just kill more of them), there were still adequate supplies of spruce (there are plenty of trees around, just cut more of them). Estimates varied but in general they looked forward to at least “two generations†worth of trees remaining. There was no discussion about doing anything to ensure a steady supply of trees for the future; that was a task for “governments.†Posey Manufacturing of Hoquiam, Washington started supplying both Sitka spruce lumber and glued-up soundboard panels to the industry in 1909 or 1910. By the 1920s it was a large and thriving manufacturing company so it must have been supplying lumber and/or soundboard panels to quite a few different pianomakers. ddf Very good, thanks.Interesting to learn some of the history the west coast timber developments. In earlier times that was the mindset; the scorched earth policy of unlimited resources has us where we are today.
|
|
|
Forums43
Topics223,403
Posts3,349,419
Members111,636
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|