Welcome to the Piano World Piano Forums
Over 2 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers (it's free)
It's Fun to Play the Piano ... Please Pass It On!

SEARCH
the Forums & Piano World

This custom search works much better than the built in one and allows searching older posts.
(ad 125) Sweetwater - Digital Keyboards & Other Gear
Digital Pianos at Sweetwater
(ad) Pearl River
Pearl River Pianos
(ad) Pianoteq
(ad) P B Guide
Acoustic & Digital Piano Guide
PianoSupplies.com (150)
Piano Accessories Music Related Gifts Piano Tuning Equipment Piano Moving Equipment
We now offer Gift Certificates in our online store!
(ad) Estonia Piano
Estonia Piano
Quick Links to Useful Stuff
Our Classified Ads
Find Piano Professionals-

*Piano Dealers - Piano Stores
*Piano Tuners
*Piano Teachers
*Piano Movers
*Piano Restorations
*Piano Manufacturers
*Organs

Quick Links:
*Advertise On Piano World
*Free Piano Newsletter
*Online Piano Recitals
*Piano Recitals Index
*Piano Accessories
* Buying a Piano
*Buying A Acoustic Piano
*Buying a Digital Piano
*Pianos for Sale
*Sell Your Piano
*How Old is My Piano?
*Piano Books
*Piano Art, Pictures, & Posters
*Directory/Site Map
*Contest
*Links
*Virtual Piano
*Music Word Search
*Piano Screen Saver
*Piano Videos
*Virtual Piano Chords
Page 1 of 3 1 2 3 >
Topic Options
#1162146 - 03/13/09 12:23 AM Attn Rebuilders: Pounding in machine
Supply Offline
3000 Post Club Member

Registered: 09/11/06
Posts: 3919
Loc: Vancouver Island, BC, Canada
Rebuilders -
I have been thinking about developing and building a simple pounding in machine. It would really be advantageous for a shop to have a machine that pounds every key about 20-30,000 times after regulation and first voicing, to stabilize the tuning, bring action and key felts to the state of compression they will eventually attain, pound in the voicing etc. Then fine regulate, tune and voice and you can send the piano out to the client and not have to worry about major changes in the first months of playing.

This is what factories do, and it makes real sense. Would there be a market for such a machine? What would it be worth to a rebuilding shop?
_________________________
Jurgen Goering
Piano Forte Supply
www.pianofortesupply.com

Piattino Caster Cups distributor

Top
(ad PTG 568) Grand Action Regulation in 37 Steps
Grand Action Regulation in 37 Steps
#1162150 - 03/13/09 12:28 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Dale Fox Offline
1000 Post Club Member

Registered: 10/17/04
Posts: 1065
Loc: Nor California Sacramento area
I've been thinking of making my own. Mason & Hamlin has a nice machine based on a series of cams. Never gotten around to it to this point. I figure it would take me about two days of labor to build once I get the design on paper. Parts wouldn't be that big an expense. So it would have to cost less than the two days labor it would take to build myself????
_________________________
Dale Fox
Registered Piano Technician
Remanufacturing/Rebuilding

Top
#1162153 - 03/13/09 12:50 AM Re: Attn Rebuilders: Pounding in machine [Re: Dale Fox]
Rod Verhnjak Offline
3000 Post Club Member

Registered: 04/09/06
Posts: 3659
Loc: Vancouver B.C. Canada
I use a Playola that works great. I have a disk I play at night that pounds in the notes for 10 hours.
What I like is it also plays music during the day.
I have over 5000 songs on disks.

I paid $1,500 for a used one and felt it was worth every bit of that.
_________________________
Verhnjak Pianos
Specializing in the Restoration, Refinishing & Maintenance
of Fine Heirloom Pianos

Exclusive Dealer For Charles R. Walter Pianos
www.pianoman.ca
Verhnjak Pianos Facebook


Top
#1162174 - 03/13/09 02:44 AM Re: Attn Rebuilders: Pounding in machine [Re: Rod Verhnjak]
rysowers Offline
2000 Post Club Member

Registered: 04/16/07
Posts: 2407
Loc: Olympia, WA
I've thought about it for years! It's a great idea Jurgen.

Rod - do they still make Playolas?
_________________________
Ryan Sowers,
Pianova Piano Service
Olympia, WA
www.pianova.net

Top
#1162196 - 03/13/09 05:46 AM Re: Attn Rebuilders: Pounding in machine [Re: rysowers]
Gregor Offline
Full Member

Registered: 10/31/08
Posts: 436
Loc: Münster, Germany
Okay, it´s not the same like a machine, but it helps to work all new felts (excepted the hammer felts)and leather with a hammer. Just pounding them with a hammer on the work bench.

Gregor
_________________________
piano tech - tuner - dealer
Münster, Germany
www.weldert.de

Top
#1162212 - 03/13/09 08:03 AM Re: Attn Rebuilders: Pounding in machine [Re: Gregor]
Les Koltvedt Offline
3000 Post Club Member

Registered: 04/13/05
Posts: 3195
Loc: Canton, MI
Just bring your niece's and nephews under the age of five over, they always like to pound on mine when they visit.... grin ha
_________________________
Les Koltvedt
LK Piano
Servicing the S. Eastern Michigan Area
PTG Associate

Top
#1162216 - 03/13/09 08:24 AM Re: Attn Rebuilders: Pounding in machine [Re: Les Koltvedt]
UnrightTooner Offline
4000 Post Club Member

Registered: 11/13/08
Posts: 4949
Loc: Bradford County, PA
Anybody have a picture of one that piano manufactures use? All I can think of is that scene from Barbarella!
_________________________
Jeff Deutschle
Part-Time Tuner
Who taught the first chicken how to peck?

Top
#1162277 - 03/13/09 11:14 AM Re: Attn Rebuilders: Pounding in machine [Re: UnrightTooner]
S. Phillips Offline
Full Member

Registered: 10/15/07
Posts: 299
Loc: Forte Farm, Lexington, KY
Sign me up..

Sally
_________________________
Sally Phillips
Piano Technician
One can always find something to improve.
2 Steinway Os, Steinway B & C, C. Bechstein A
Phillips Piano Tech
Contributor - Acoustic and Digital Piano Buyer
New Federal and State Ivory Regulations and Pianos
http://www.pianobuyer.com/articles/ivory.html

Top
#1162327 - 03/13/09 01:23 PM Re: Attn Rebuilders: Pounding in machine [Re: S. Phillips]
Gregor Offline
Full Member

Registered: 10/31/08
Posts: 436
Loc: Münster, Germany
_________________________
piano tech - tuner - dealer
Münster, Germany
www.weldert.de

Top
#1162333 - 03/13/09 01:38 PM Re: Attn Rebuilders: Pounding in machine [Re: Gregor]
UnrightTooner Offline
4000 Post Club Member

Registered: 11/13/08
Posts: 4949
Loc: Bradford County, PA
Thanks, Gregor!

Hey everyone, there is a model of an upright action with a true repetition lever on that site!
_________________________
Jeff Deutschle
Part-Time Tuner
Who taught the first chicken how to peck?

Top
#1162340 - 03/13/09 01:46 PM Re: Attn Rebuilders: Pounding in machine [Re: UnrightTooner]
Erus Offline
Full Member

Registered: 12/26/07
Posts: 386
Loc: Mexico
Here's the model mentioned by Jeff:



Do you think that action could be troublesome?


Edited by Erus (03/13/09 01:49 PM)

Top
#1162400 - 03/13/09 04:32 PM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Del Offline
5000 Post Club Member

Registered: 09/04/03
Posts: 5317
Loc: Olympia, Washington
Originally Posted By: Supply
Rebuilders -
This is what factories do, and it makes real sense. Would there be a market for such a machine? What would it be worth to a rebuilding shop?


I think so. I've been using one for about 15 years now.

ddf
_________________________
Delwin D Fandrich
Piano Research, Design & Manufacturing Consultant
ddfandrich@gmail.com
(To contact me privately please use this e-mail address.)

Stupidity is a rare condition, ignorance is a common choice. --Anon

Top
#1162429 - 03/13/09 05:37 PM Re: Attn Rebuilders: Pounding in machine [Re: Del]
accordeur Online   content
1000 Post Club Member

Registered: 06/23/06
Posts: 1207
Loc: Qubec, Canada
Unright or Erus,

You should really start a new thread with that action model. To me, it looks like it would be difficult to regulate, especially drop and let-off. I think the Fandrich action is simpler, easier to regulate and more elegant.
_________________________
Jean Poulin

Musician, Tuner and Technician

www.actionpiano.ca

Top
#1162485 - 03/13/09 08:36 PM Re: Attn Rebuilders: Pounding in machine [Re: rysowers]
Rod Verhnjak Offline
3000 Post Club Member

Registered: 04/09/06
Posts: 3659
Loc: Vancouver B.C. Canada
Originally Posted By: rysowers


Rod - do they still make Playolas?


Yep, PianoDisc makes them. Way to much money for what we need them for.


Edited by Rod Verhnjak (03/13/09 08:37 PM)
_________________________
Verhnjak Pianos
Specializing in the Restoration, Refinishing & Maintenance
of Fine Heirloom Pianos

Exclusive Dealer For Charles R. Walter Pianos
www.pianoman.ca
Verhnjak Pianos Facebook


Top
#1162488 - 03/13/09 08:49 PM Re: Attn Rebuilders: Pounding in machine [Re: Rod Verhnjak]
Del Offline
5000 Post Club Member

Registered: 09/04/03
Posts: 5317
Loc: Olympia, Washington
Originally Posted By: Rod Verhnjak
Originally Posted By: rysowers


Rod - do they still make Playolas?


Yep, PianoDisc makes them. Way to much money for what we need them for.


They do?

ddf
_________________________
Delwin D Fandrich
Piano Research, Design & Manufacturing Consultant
ddfandrich@gmail.com
(To contact me privately please use this e-mail address.)

Stupidity is a rare condition, ignorance is a common choice. --Anon

Top
#1162505 - 03/13/09 10:05 PM Re: Attn Rebuilders: Pounding in machine [Re: Del]
RoyP Offline
500 Post Club Member

Registered: 12/10/03
Posts: 786
Loc: Cincinnati, Ohio
I believe it was a QRS product, not Pianodisc. I don't see it on the website currently.
_________________________
Roy Peters, RPT
Cincinnati, Ohio
www.cincypiano.com

Top
#1162536 - 03/13/09 11:28 PM Re: Attn Rebuilders: Pounding in machine [Re: RoyP]
Rod Verhnjak Offline
3000 Post Club Member

Registered: 04/09/06
Posts: 3659
Loc: Vancouver B.C. Canada


Edited by Rod Verhnjak (03/13/09 11:30 PM)
_________________________
Verhnjak Pianos
Specializing in the Restoration, Refinishing & Maintenance
of Fine Heirloom Pianos

Exclusive Dealer For Charles R. Walter Pianos
www.pianoman.ca
Verhnjak Pianos Facebook


Top
#1162578 - 03/14/09 01:29 AM Re: Attn Rebuilders: Pounding in machine [Re: Rod Verhnjak]
rysowers Offline
2000 Post Club Member

Registered: 04/16/07
Posts: 2407
Loc: Olympia, WA
Yeah, $4200 is a chunk of change. You could hire a lot of child labor for that amount.
_________________________
Ryan Sowers,
Pianova Piano Service
Olympia, WA
www.pianova.net

Top
#1162585 - 03/14/09 01:50 AM Re: Attn Rebuilders: Pounding in machine [Re: rysowers]
Rod Verhnjak Offline
3000 Post Club Member

Registered: 04/09/06
Posts: 3659
Loc: Vancouver B.C. Canada
This one is for sale on ebay. Still $3,000.00



_________________________
Verhnjak Pianos
Specializing in the Restoration, Refinishing & Maintenance
of Fine Heirloom Pianos

Exclusive Dealer For Charles R. Walter Pianos
www.pianoman.ca
Verhnjak Pianos Facebook


Top
#1163049 - 03/15/09 08:42 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Duane McGuire Offline
Full Member

Registered: 12/27/06
Posts: 49
Loc: Utah
Jurgen, I'm certainly interested, but don't go into production for me! I am getting started at rebuilding, and expect to be full time when I retire from my current job in about 5 years. Anyway I'd think every rebuilder needs one. Priorities and money are the thing. I'd think that you need to come in at less than $1000 - $1500. More than that and this inventive crowd will probably be in the DIY camp. Just my guess.
_________________________
- Duane McGuire
www.mcguirepiano.com

PTG Associate

Top
#1165080 - 03/19/09 02:16 AM Re: Attn Rebuilders: Pounding in machine [Re: Duane McGuire]
Supply Offline
3000 Post Club Member

Registered: 09/11/06
Posts: 3919
Loc: Vancouver Island, BC, Canada
Yes, I was thinking in that ball park.

If it is the floor model I visualize, it will need to have a certain amount of mass to keep it stable. Which means that shipping cost could stifle the sales potential for the machine.

Perhaps just produce blueprints for techs to build the machine or have it built for them locally?
_________________________
Jurgen Goering
Piano Forte Supply
www.pianofortesupply.com

Piattino Caster Cups distributor

Top
#1165088 - 03/19/09 02:28 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Rod Verhnjak Offline
3000 Post Club Member

Registered: 04/09/06
Posts: 3659
Loc: Vancouver B.C. Canada
Sorry my good friend but before you get into business.

You mean like this?



When built it looks like this.



And Sounds like this.

http://www.youtube.com/watch?v=2a_uTTMT30A&feature=player_embedded
_________________________
Verhnjak Pianos
Specializing in the Restoration, Refinishing & Maintenance
of Fine Heirloom Pianos

Exclusive Dealer For Charles R. Walter Pianos
www.pianoman.ca
Verhnjak Pianos Facebook


Top
#1165099 - 03/19/09 03:08 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
BDB Online   content
Yikes! 10000 Post Club Member

Registered: 06/07/03
Posts: 21673
Loc: Oakland
Originally Posted By: Supply
Yes, I was thinking in that ball park.

If it is the floor model I visualize, it will need to have a certain amount of mass to keep it stable. Which means that shipping cost could stifle the sales potential for the machine.

Perhaps just produce blueprints for techs to build the machine or have it built for them locally?
Or leave a shelf or box that could be filled with sand or rocks.

Personally, I am not interested. If a part sticks, it will stick when it is pounded, so it will not wear in anyway.
_________________________
Semipro Tech

Top
#1165360 - 03/19/09 03:08 PM Re: Attn Rebuilders: Pounding in machine [Re: BDB]
Supply Offline
3000 Post Club Member

Registered: 09/11/06
Posts: 3919
Loc: Vancouver Island, BC, Canada
Originally Posted By: BDB
.. If a part sticks, it will stick when it is pounded, so it will not wear in anyway.


It has nothing to do with sticking parts. If parts are sticking, your repair and regulation is incomplete. Finish doing that work before you hit the switch of the pounding machine.

Pounding machines are used to play all keys vigorously, usually about 20,000 times or so, after which a final regulation, voicing and of course tuning takes place. This will result in a piano that is much, much more stable in tuning, touch, and voicing after delivery.

I see that Rod has found a source for such a machine that I was not aware of. Thanks Rod!
_________________________
Jurgen Goering
Piano Forte Supply
www.pianofortesupply.com

Piattino Caster Cups distributor

Top
#1165375 - 03/19/09 03:37 PM Re: Attn Rebuilders: Pounding in machine [Re: Rod Verhnjak]
Bart Kinlein Offline
500 Post Club Member

Registered: 10/14/08
Posts: 715
Loc: Maryland
Quote:
And Sounds like this.


Pounder refrain

Kind of catchy. Reminds me of...

Never mind
grin
_________________________
Steinway 1905 model A, rebuild started 2008, completed 2012
Yahama CVP-401
Will somone get my wife off the Steinway so I can play it!

Top
#2017676 - 01/20/13 05:28 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Pianos & Pianos Mexico Offline
Full Member

Registered: 10/01/08
Posts: 46
Loc: Mexico
Hi! I´like to revive this post because Im restoring about 20 pianos for an institute, and after replace all felt and bulkskin from the action i have to regulate again about a month of use, but they don´t play all the keys and the compression on the felt is not even. Who wants to wait and regulate over and over

I have draw some ideas of a 2 lever pouding machine like the one on the video but to be place on top of the piano to avoid that big box. I haven´t build nothing yet,

I´ll love a electronic one with solenoids but still to expensive and more living in mexico, I have talk to a WN&G tech and they have design a pounder over the pianodisk system, the hardest part is to hold down the solenoids up side down with springs.

The playola is too old and for the price, the lx system is far less expensive than that and better,

Who has more ideas, pictures or drawings of your machines? I guess most if not all restorers should have one on the shop.

someone here has an old (but not to old) un-used pianodisk system or parts sitting around the shop getting dusty I´ll be interested

I´ll apreciate your comment

Thanks
_________________________
Sergio L. Ruiz Jones
Piano Tech
Pianos & Pianos
Afinacin y Restauracin de pianos
www.pianosandpianos.com
Sergio.ruiz@pianosandpianos.com
Mazatln, Mexico.

Top
#2017735 - 01/20/13 09:08 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Olek Offline
7000 Post Club Member

Registered: 03/14/08
Posts: 7901
Loc: France
I learned to pound with 2 hand pounders, then a regulation pass is necessary. And earplugs
Keyboards are stabilized with a long lever that push on the underside of the pinblock and an adapted woodblock above the balance (als used to lower a key that is only a little high) balance punchings where ironed before installation, also , it does not make them so even but it helps.

Using first grade paper punching is also a must. The ones sold by Yamaha are good, not too sensitive to moisture and rigid enough.

The machine pounding is more efficient for the hammers and the action, but hand pounding can be firm , also on a new stringed piano you have to tune hard 4 times and that pound also , regulation passes and voicing are inserted between those tunings. I will pass the exact procedure.

So I always have think I need a machine, but can live without it.
I believe the machine pound not so hard, also , I asked how many strokes and had no precise answer, but even 10000 have been said to me too much.

Do someone know an exact range ?



Ps felted blocks in wood (leaded) are placed on the strings to avoid too much noise , it also make the pounding more efficient. (not anyone agree on this, but the noise is really too much, I also dont like to pound strong on bass strings)


Edited by Kamin (01/20/13 09:35 AM)
_________________________
It is critical that you call your Senators and Representatives and ask them to cosponsor S. 2587 and H.R. 5052. Getting your legislators to cosponsor these bills


Top
#2018356 - 01/21/13 11:57 AM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Supply Offline
3000 Post Club Member

Registered: 09/11/06
Posts: 3919
Loc: Vancouver Island, BC, Canada
The idea of the pounder is to effectively and quickly put the equivalent of 10, 20 or more hours of playing onto the new or re-built piano. In factories, this noisy process is done in sound insulated rooms. It seems they want the strings to resonate freely.
At two blows per second, a pounder can rack up 10,000 keystrokes for every key in short order (extended lunch break!).
This would be hard to beat pounding by hand.
_________________________
Jurgen Goering
Piano Forte Supply
www.pianofortesupply.com

Piattino Caster Cups distributor

Top
#2018404 - 01/21/13 01:15 PM Re: Attn Rebuilders: Pounding in machine [Re: Supply]
Olek Offline
7000 Post Club Member

Registered: 03/14/08
Posts: 7901
Loc: France
Sure Jurgen , at 7200 impact one hour, I dont compete...

Then :

I hit several times before regulation to check the jack alignment

Then after finishing regulation I do the first tuning with tough strike

After that I do the damper works – then a second tuning with hard strike

Then second regulation and pre-toning, after that a third tough tuning

After that the finish regulation, finish damper regulation and finish voicing.

Now if you have counted well – the amount is a little less than 10000 …..

The reason is that regulation stability comes with time and in the correct relation between strike power to strike amount.

Too much is not automatically better.

( I am just jealous wink
 




Edited by Kamin (01/21/13 03:34 PM)
_________________________
It is critical that you call your Senators and Representatives and ask them to cosponsor S. 2587 and H.R. 5052. Getting your legislators to cosponsor these bills


Top
#2018441 - 01/21/13 02:06 PM Re: Attn Rebuilders: Pounding in machine [Re: Olek]
Supply Offline
3000 Post Club Member

Registered: 09/11/06
Posts: 3919
Loc: Vancouver Island, BC, Canada
Originally Posted By: Kamin
...Too much is not automatically better.

( I am just jalous wink

...but not enough is automatically worse!... I kind of wish I had a pounder too...
_________________________
Jurgen Goering
Piano Forte Supply
www.pianofortesupply.com

Piattino Caster Cups distributor

Top
Page 1 of 3 1 2 3 >

Moderator:  Piano World 
What's Hot!!
8 Live Ragtime Piano Players on the Cape!
-------------------
HOW TO POST PICTURES on the Piano Forums
-------------------
Sharing is Caring!
About the Buttons
-------------------
(125ad) Dampp Chaser
Dampp Chaser Piano Life Saver
Ad (Seiler/Knabe)
Seiler Pianos
Sheet Music
(PW is an affiliate)
Sheet Music Plus Featured Sale
(ad) HAILUN Pianos
Hailun Pianos - Click for More
(ad) Lindeblad Piano
Lindeblad Piano Restoration
New Topics - Multiple Forums
Heading to the junk pile...
by Emmery
10/25/14 07:39 PM
Piano make
by ali123
10/25/14 06:24 PM
Yamaha UX vs WX
by goldmund
10/25/14 11:34 AM
Need help with chords
by Shirz
10/25/14 07:52 AM
Which are the best forums for piano technicians and DIYers?
by Withindale
10/25/14 03:17 AM
Who's Online
133 registered (36251, Alan_Dublin, A Guy, alfredo capurso, accordeur, 37 invisible), 1414 Guests and 15 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
76656 Members
42 Forums
158494 Topics
2327614 Posts

Max Online: 15252 @ 03/21/10 11:39 PM
(ads by Google)

Visit our online store for gifts for music lovers

 
Help keep the forums up and running with a donation, any amount is appreciated!
Or by becoming a Subscribing member! Thank-you.
Donate   Subscribe
 
Our Piano Related Classified Ads
|
Dealers | Tuners | Lessons | Movers | Restorations | Pianos For Sale | Sell Your Piano |

Advertise on Piano World
| Subscribe | Piano World | PianoSupplies.com | Advertise on Piano World | Donate | Link to Us | Classifieds |
| |Contact | Privacy | Legal | About Us | Site Map | Free Newsletter | Press Room |


copyright 1997 - 2014 Piano World ® all rights reserved
No part of this site may be reproduced without prior written permission