Welcome to the Piano World Piano Forums
Over 2 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers (it's free)
It's Fun to Play the Piano ... Please Pass It On!

Gifts and supplies for the musician
SEARCH
the Forums & Piano World

This custom search works much better than the built in one and allows searching older posts.
Ad (Piano Sing)
How to Make Your Piano Sing
(ad) Pearl River
Pearl River Pianos
(ad 125) Sweetwater - Digital Keyboards & Other Gear
Digital Pianos at Sweetwater
(ad) Pianoteq
(ad) P B Guide
Acoustic & Digital Piano Guide
Who's Online
84 registered (beet31425, Beemer, A2mom, Ben_NZ, AZNpiano, 25 invisible), 1068 Guests and 14 Spiders online.
Key: Admin, Global Mod, Mod
Quick Links to Useful Piano & Music Resources
Our Classified Ads
Find Piano Professionals-

*Piano Dealers - Piano Stores
*Piano Tuners
*Piano Teachers
*Piano Movers
*Piano Restorations
*Piano Manufacturers
*Organs

Quick Links:
*Advertise On Piano World
*Free Piano Newsletter
*Online Piano Recitals
*Piano Recitals Index
*Piano & Music Accessories
*Music School Listings
* Buying a Piano
*Buying A Acoustic Piano
*Buying a Digital Piano
*Pianos for Sale
*Sell Your Piano
*How Old is My Piano?
*Piano Books
*Piano Art, Pictures, & Posters
*Directory/Site Map
*Contest
*Links
*Virtual Piano
*Music Word Search
*Piano Screen Saver
*Piano Videos
*Virtual Piano Chords
(ad) Estonia Piano
Estonia Pianos
Page 2 of 2 < 1 2
Topic Options
#2018541 - 01/21/13 06:02 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Silverwood Pianos Offline
4000 Post Club Member

Registered: 03/10/08
Posts: 4232
Loc: Vancouver B. C. Canada
They just look a long way out of the key from here that's all.

Usually with old materials capstans are out a long way but with new whippen heel cloth and other cloths in the keyboard they have to be wound back in.
_________________________
Dan Silverwood
www.silverwoodpianos.com
http://silverwoodpianos.blogspot.com/
http://www.facebook.com/SilverwoodPianosDotCom
"If you think it's expensive to hire a professional to do the job, wait until you hire an amateur."

Top
(ad PTG 757) The Value of PTG Membership
The Value of a PTG Membership
#2019498 - 01/23/13 08:12 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: Del]
Roy123 Offline
1000 Post Club Member

Registered: 09/20/04
Posts: 1725
Loc: Massachusetts
Originally Posted By: Del
After all, NY Steinways for several decades were built with angled capstans driving wippens with square capstan blocks.

ddf


...and I've also seen NY Steinways built with vertical capstans and wippens that had the heel-felt slot set at an angle as was appropriate for the no-longer used angled capstans. It makes one wonder...

Top
#2019512 - 01/23/13 08:45 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: Roy123]
RestorerPhil Offline
Full Member

Registered: 02/26/12
Posts: 212
Loc: Georgia, USA
That day the working guy said,

Quote:
Dang it! If they get me the wrong parts, then I will use the wrong parts. Nobody does nuttin right around here these days. If you ask me........


(It was one of those days - maybe a Monday.) mad
_________________________
Lavender Piano Services
Established 1977
Tuning, Concert Maintenance,
Rebuilding & Restoration

Top
#2019569 - 01/23/13 10:15 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
woodfab Offline
Full Member

Registered: 12/06/05
Posts: 383
Loc: Stoneham, MA
What about the old saying "if it don't fit force it"

So far the only things I had to change was to remove the hammer rest and remold the whippen flange rail.
I didn't have to move the let-off button rail.
I haven't leveled the keys yet. but so far it appears to be working out.


_________________________
Dan (Piano Tinkerer)

Top
#2019618 - 01/23/13 12:12 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
rysowers Offline
2000 Post Club Member

Registered: 04/16/07
Posts: 2499
Loc: Olympia, WA
Looking good! What are going to call your new hybrid?
_________________________
Ryan Sowers,
Pianova Piano Service
Olympia, WA
www.pianova.net

Top
#2019631 - 01/23/13 12:29 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
BDB Online   content
Yikes! 10000 Post Club Member

Registered: 06/07/03
Posts: 21918
Loc: Oakland
A Steinball? I once used some Yamaha parts in a Chickering, which then became a Chickaha or a Yammering.
_________________________
Semipro Tech

Top
#2019633 - 01/23/13 12:30 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Silverwood Pianos Offline
4000 Post Club Member

Registered: 03/10/08
Posts: 4232
Loc: Vancouver B. C. Canada

Keinway or Stimball.
_________________________
Dan Silverwood
www.silverwoodpianos.com
http://silverwoodpianos.blogspot.com/
http://www.facebook.com/SilverwoodPianosDotCom
"If you think it's expensive to hire a professional to do the job, wait until you hire an amateur."

Top
#2019638 - 01/23/13 12:34 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: rysowers]
TunerJeff Offline
Full Member

Registered: 06/22/11
Posts: 498
Loc: Oregon Coast
Steinball?

Kimway?

Steinkimway?

Keinball?

Kimsteinballway?

I have enjoyed this thread. Interesting. I'd be curious about the touchweight with the new parts. Heavier? Lighter? It seems that the parts will work...with the modifications on the rail and a washer under the let-off rail...but what does it feel like?

Curious minds,
want to know!
Smiling,
I remain,
_________________________
Jeffrey T. Hickey, RPT
Oregon Coast Piano Services
TunerJeff440@aol.com

Top
#2019749 - 01/23/13 04:33 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
woodfab Offline
Full Member

Registered: 12/06/05
Posts: 383
Loc: Stoneham, MA
I kind of like "Kimsteinballway"

I'm planing on using Kranich & Bach legs so I'll have to call
a (Kranich & Steinballway)

One problem I have now is that there's no strings in the piano yet.

This is my first piano project to come this close to playable.

Thank you guys for all the help over the last few years.

Larry Buck was interested in seeing the pin-block drill in action so I haven't drilled all the holes yet.

I have to hand it to you guys, rebuilding pianos takes a lot of knowledge, patients, and is quite time consuming.
I find myself CUTTING CORNERS.




Edited by woodfab (01/23/13 08:26 PM)
_________________________
Dan (Piano Tinkerer)

Top
#2019919 - 01/23/13 08:57 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
BDB Online   content
Yikes! 10000 Post Club Member

Registered: 06/07/03
Posts: 21918
Loc: Oakland
We would all cure more pianos if we had more patients. I guess we just have to be patient!
_________________________
Semipro Tech

Top
#2019960 - 01/23/13 10:17 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Dave B Offline
1000 Post Club Member

Registered: 08/01/11
Posts: 1974
Loc: Philadelphia area
Wondering how you 'remolded' the flange rail?

Top
#2020108 - 01/24/13 05:08 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Mark R. Offline
2000 Post Club Member

Registered: 07/31/09
Posts: 2069
Loc: Pretoria, South Africa
Dan,

Are you a machinist in one of your other lives? I see a Hardinge label and a lathe in the background...
_________________________
Autodidact interested in piano technology.
LinkedIn profile
1922 49" Zimmermann, project piano.
1970 44" Ibach, daily music maker.

Top
#2020190 - 01/24/13 08:29 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
woodfab Offline
Full Member

Registered: 12/06/05
Posts: 383
Loc: Stoneham, MA
"Wondering how you 'remolded' the flange rail?"

I traced the outline of the profile I wanted on the end of the rail and then made about six cuts with a table saw and a little rounding with a file.




I was a R&D machinist for ten years and when I left that job I was going crazy without access to a machine shop so I ended setting up my own.
_________________________
Dan (Piano Tinkerer)

Top
#2020255 - 01/24/13 10:46 AM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Tim Sullivan Offline
Full Member

Registered: 09/24/09
Posts: 92
Loc: Muskoka, Ontario
Brilliant. I'm sure there are a lot of professional piano techs out there who appreciate and envy your resourcefulness and craftsmanship. I love your tuning pin boring setup.
Tim
_________________________
I'm a piano tech and dealer in Central Ontario.
www.huntsvillepiano.ca

Top
#2020352 - 01/24/13 01:22 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
rysowers Offline
2000 Post Club Member

Registered: 04/16/07
Posts: 2499
Loc: Olympia, WA
Ditto! I'm sure most of us when benefit a lot from Machinist training. Bill Spurlock was a machinist before he became a piano technician.
_________________________
Ryan Sowers,
Pianova Piano Service
Olympia, WA
www.pianova.net

Top
#2020375 - 01/24/13 01:54 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Olek Offline
7000 Post Club Member

Registered: 03/14/08
Posts: 7904
Loc: France
It is very well done and installed.

at last the parts seem to fit.

usual center to jack distance is 99 mm

jack height seem to fit (usually 49 mm)

I would have wait to have the strings mounted to glue the hammers, because strike line depends of them, you may have to change some part and glue at a differnt dimension on the shank, if it is better for tone
_________________________
It is critical that you call your Senators and Representatives and ask them to cosponsor S. 2587 and H.R. 5052. Getting your legislators to cosponsor these bills


Top
#2020408 - 01/24/13 02:34 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: Olek]
woodfab Offline
Full Member

Registered: 12/06/05
Posts: 383
Loc: Stoneham, MA
The hammers and shanks were assembled in Larry Buck's shop on the same model Kimball. For some reason they decided not to continue with the rebuild.

I ended up with the piano, I put the action in my shop and the rest of the piano in another basement.

Well a few months later the basement flooded with 20" of water.
For some reason after a day and a half sitting in water the piano had some major veneer and glue-joint problems.
So I had to put it asleep.

I held the hammers side by side with the ones I pulled out of this Kimball and as far as I could see they are a perfect match.


Edited by woodfab (01/24/13 02:35 PM)
_________________________
Dan (Piano Tinkerer)

Top
#2020573 - 01/24/13 05:02 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: rysowers]
kpembrook Offline
1000 Post Club Member

Registered: 04/06/10
Posts: 1342
Loc: Michigan
Originally Posted By: rysowers
Ditto! I'm sure most of us when benefit a lot from Machinist training. Bill Spurlock was a machinist before he became a piano technician.


We have a machinist in our chapter. We get all kinds of cool stuff he designs and builds.
_________________________
Keith Akins, RPT
USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings
Supporting Piano Owners D-I-Y piano tuning and repair

Top
#2020715 - 01/24/13 08:38 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Craig Hair Offline
Full Member

Registered: 06/03/11
Posts: 210
Loc: Holyoke, MA
I would note that the kimball wipp, by using the silk cords eliminates the friction butterfly springs create in the groove in the balancier. I don't know if this compensates for the compond loading of a butterfly spring in repetition, but I've never found a kimball style wipp bound up with a big blob of graphite grease either.
_________________________
Craig Hair
Hampshire Piano
Holyoke, MA

hampshirepiano.co
soundboardrecrown.com

If I seem slow, I simply must be stopped

Top
#2020741 - 01/24/13 09:11 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
woodfab Offline
Full Member

Registered: 12/06/05
Posts: 383
Loc: Stoneham, MA
Yes Craig I appreciate your reply. My original questions was "Ar Steinway whippens beter than Kimball whippens"
My thought are that Steinway whippens cost about twice as much as Kimball whippens doesn't this apply with you get what you pay for.
Also I wanted to make this action feel more like the higher end pianos feel.
One of the reasons I'm attempting to change this action is that I had the unbelievable opportunity to play $50,000 to $150,000 pianos and I'm on a quest to get there.
I hate to admit it but I have long way to go.
_________________________
Dan (Piano Tinkerer)

Top
#2020779 - 01/24/13 10:13 PM Re: Ar Steinway whippens beter than Kimball whippens [Re: woodfab]
Craig Hair Offline
Full Member

Registered: 06/03/11
Posts: 210
Loc: Holyoke, MA
It may be a long road, but you seem to be digging in with some determination.
The one advantage that the Steinway wipp may offer is the room to move the capstan closer to the jack. Action work is essentially advanced teeter-totter theory. How do we lift the big kid with the little kid? Moving the capstan toward the balance rail is essentially like moving the big kid closer to the fulcrum. The little kid gains an advantage. This also means that the capstan is pressin farther out on the wippen body, it lengthens that lever and gives an advantage to the key that is trying to lift it. Two advantages from one change.
I mention this because you are working on a very short piano. In the quest to make a small piano, many makers resort to taking an inch or two off of the length of the keys, without making any changes to the action stack. This robs the key of its leverage against the action. This in turn gives a heavy touch, to be lessened by the addition of leads, which in turn increases the action's inertia. Most high end pianos avoid this.
You might also want to compare the weight of your hammers with the original. That one gram at the hammer equals 5, 6, or 7 grams at the key rule can get out of controll fast.

P.S. I have a beautiful set of fancy Kranich legs if you want them
_________________________
Craig Hair
Hampshire Piano
Holyoke, MA

hampshirepiano.co
soundboardrecrown.com

If I seem slow, I simply must be stopped

Top
Page 2 of 2 < 1 2

Moderator:  Piano World 
What's Hot!!
Christmas Header
- > Gift Ideas for Music Lovers < -
From PianoSupplies.com a division of Piano World.
-------------------
The December Free Piano Newsletter
-------------------
Forums Rules & Help
-------------------
ADVERTISE
on Piano World

The world's most popular piano web site.
-------------------
PIANO BOOKS
Interesting books about the piano, pianists, piano history, biographies, memoirs and more!
(ad) Yamaha CP Music Rest Promo
Yamaha CP Music Rest Promo
(ad) HAILUN Pianos
Hailun Pianos - Click for More
Ad (Seiler/Knabe)
Seiler Pianos
(125ad) Dampp Chaser
Dampp Chaser Piano Life Saver
(ad) Lindeblad Piano
Lindeblad Piano Restoration
(ad) Piano Music Sale - Dover Publications
Piano Music Sale
Sheet Music Plus (125)
Sheet Music Plus Featured Sale
New Topics - Multiple Forums
How to determine felt thickness without specifications?
by JoeThePro
12/20/14 01:09 AM
Trill technique question
by pianolearnerstride
12/19/14 10:19 PM
Anyone use a seat cushion?
by DeadPoets
12/19/14 08:48 PM
Lester Betsy Ross Spinet- worth?
by cobalt60
12/19/14 08:22 PM
How deep into the tuning hammer should pin go?
by JoeThePro
12/19/14 07:37 PM
Forum Stats
77362 Members
42 Forums
160006 Topics
2349694 Posts

Max Online: 15252 @ 03/21/10 11:39 PM
Gift Ideas for Music Lovers!
Find the Perfect Gift for the Music Lovers on your List!
Visit our online store today.

Visit our online store for gifts for music lovers

 
Help keep the forums up and running with a donation, any amount is appreciated!
Or by becoming a Subscribing member! Thank-you.
Donate   Subscribe
 
Our Piano Related Classified Ads
|
Dealers | Tuners | Lessons | Movers | Restorations | Pianos For Sale | Sell Your Piano |

Advertise on Piano World
| Subscribe | Piano World | PianoSupplies.com | Advertise on Piano World | Donate | Link to Us | Classifieds |
| |Contact | Privacy | Legal | About Us | Site Map | Free Newsletter | Press Room |


copyright 1997 - 2014 Piano World ® all rights reserved
No part of this site may be reproduced without prior written permission