|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
79 members (AaronSF, apianostudent, beeboss, brdwyguy, benkeys, Abdulrohmanoman, accordeur, 19 invisible),
2,241
guests, and
447
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
The student tuners begin to learn by plucking usually Max wants to forget and throw away his life "a plectrum with rope". Now he beginning tuner-student yet
|
|
|
|
Joined: Oct 2008
Posts: 483
Full Member
|
Full Member
Joined: Oct 2008
Posts: 483 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons.
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Gregor, first lessons with chipping, and chippers in factory before learning tuning, just to get some feel with the hammer.
It is not the same actually probably.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Gregor,thank you for a attention and your replic. My problem is that the part it may seem that I do not want and can not build the unisons so I have bad ears. But I work with very oldest upright piano. Pins refuse to keep the desired position in a bush and a hole of pinblock. And I have need little to overstate the desired tone in unison. So in my final temperament a human can to feel some accordion's sounding in unison (incoordination). I can assure you that after one or two visits and fix it's sound better
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
The student tuners begin to learn by plucking usually chipping after restringing, in Russian, this operation is called "tsvikovschik" (цвиковщик)
|
|
|
|
Joined: Apr 2008
Posts: 2,481
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2008
Posts: 2,481 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Sometimes us tuners need to resort to plucking and I carry a guitar pick for such occasions. Don't resort to it too often I might add. If a hammer misses a string and the customer refuses to repair it, I will still pluck tune it to get the string up to tension and in reasonable tune. On some old pianos the highest notes can get so faint, a pluck can produce a louder tone in noisy environments or a longer sustain for tuning purposes.
Piano Technician George Brown College /85 Niagara Region
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Sometimes us tuners need to resort to plucking and I carry a guitar pick for such occasions. Don't resort to it too often I might add. If a hammer misses a string and the customer refuses to repair it, I will still pluck tune it to get the string up to tension and in reasonable tune. On some old pianos the highest notes can get so faint, a pluck can produce a louder tone in noisy environments or a longer sustain for tuning purposes. This is very true. This could have written only a practicing piano's tuner. Sometimes in practice, when the use of a plectrum is inevitable. Bravo, you have explained them very clearly.
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Gregor, My problem is that the part it may seem that I do not want and can not build the unisons so I have bad ears. But I work with very oldest upright piano. Pins refuse to keep the desired position in a bush and a hole of pinblock. Max I dont believe you have bad ears, but they are twisted, you are not used to listen for the good part of tone. FOr the pins that dont stay put, try to work with the hammer very very slowly on those notes, if the pin does not grip when pushed back a little, go back and do again, once, twice, 3, 4 times, after 3 or 4 times the grip will raise. Think that the string have to hold the pin in its position, you don't need to push on the pin really, try to turn exactly in rotational plane, but with the real tuning hammer (you cannot turn slowly enough with the T hammer) THere you need the energy provided by the playing hand to send strokes to the pin so it find its bed. The only necessity is that the bottom of the pin have yet a little grip. On an old piano with no pin hold, you make the pin "float " in the hole while you fight the string tension with the hammer, the pin is just in the middle, when you release the tension it tend to go to its place naturally. That is why it is very important to learn to respect the rotational plane of the pin, so not to add wear or compress the hole. Learn to do that at any pitch (but with enough torque coming from the wire, then focus on tuning 2 strings together.) To me a piano at 415 Hz is less easy to set the pin than one at 435. The wire force is pushing the pin out of its rotational plane, it can compensate for a lot of wear. Manipulating the pin again an again with the method I give you is providing some grip, that is what I noticed anyway (the opposite of what we think generally )
Last edited by Kamin; 07/19/12 03:18 PM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Sometimes us tuners need to resort to plucking and I carry a guitar pick for such occasions. Don't resort to it too often I might add. If a hammer misses a string and the customer refuses to repair it, I will still pluck tune it to get the string up to tension and in reasonable tune. On some old pianos the highest notes can get so faint, a pluck can produce a louder tone in noisy environments or a longer sustain for tuning purposes. Sure, I also carry some finger nails for that use
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
The student tuners begin to learn by plucking usually Never heard about that. Ok, chipping after restringing, but for a normal tuning? Max, you should focus on correct unisons. Gregor, My problem is that the part it may seem that I do not want and can not build the unisons so I have bad ears. But I work with very oldest upright piano. Pins refuse to keep the desired position in a bush and a hole of pinblock. On an old piano with no pin hold, you make the pin "float " in the hole while you fight the string tension with the hammer, the pin is just in the middle, when you release the tension it tend to go to its place naturally.That is why it is very important to learn to respect the rotational plane of the pin, so not to add wear or compress the hole. Learn to do that at any pitch (but with enough torque coming from the wire, then focus on tuning 2 strings together.) Thank Isaac,it's very need words for me Regards
Last edited by Maximillyan; 07/19/12 03:24 PM.
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Max is once again trying to make a temperament old piano "Belarus" http://www.youtube.com/watch?v=KYrv2950b44
|
|
|
|
Joined: Dec 2007
Posts: 163
Full Member
|
Full Member
Joined: Dec 2007
Posts: 163 |
Hey Max, I AGREE with Johnkie, you DO use the hoover well. And you did NOT demonstrate any difference in anything more than the difference between a badly out of tune piano and one in better tune. You demonstrated NOTHING about the new temperament. The only REAL difference appeared to be in the unisons.
Do you know the difference?
Dennis C. Kelvie Piano Tuner/Technician since 1976
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
. The only REAL difference appeared to be in the unisons.
Are Unison is still there?
|
|
|
|
Joined: Apr 2008
Posts: 2,481
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2008
Posts: 2,481 |
Max, spend some time around a really good tuner if you can find one. Carefully analyze the temperament on various pianos. It would be best if you had a solid benchmark to measure your progress against.
Piano Technician George Brown College /85 Niagara Region
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
Carefully analyze the temperament on various pianos. Hi, EmmeryThanks for watching my movie. From your point of view it is permissible for temperament Piano 1957? I'm really trying to find the right temperament. I do not hide their mistakes. I am ready to criticism from other tuners. I do it's as I can, sorry
|
|
|
|
Joined: Oct 2008
Posts: 483
Full Member
|
Full Member
Joined: Oct 2008
Posts: 483 |
If you don´t have a mentor, go and get a tuning software like tunelab. Tune the temperament and check it with tunelab: what did you well, what not? Use it as a mentor.
BTW, temperament is the term for tuning the whole octave from A3 to A4.
Gregor
|
|
|
|
Joined: Apr 2008
Posts: 2,481
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2008
Posts: 2,481 |
The temperament octave can be set in in various areas of the keyboard. Some people like to extend it beyond an octave also, but an octave is the minumum needed.
F3-F4 is probably most popular. Major 3rds get too fast above this point for progressive checks for most people. I know an old timer who sets his temperament between F2-F3 and likes the slower M3's afforded by this, and lots of people go from C3-C4, especially if they are carrying a C fork.
Last edited by Emmery; 11/10/12 10:25 AM.
Piano Technician George Brown College /85 Niagara Region
|
|
|
|
Joined: Apr 2010
Posts: 447
Full Member
|
Full Member
Joined: Apr 2010
Posts: 447 |
Hey Max, If you can't watch a pro at work tuning in your area, take a look at this video: [video:youtube] http://www.youtube.com/watch?feature=player_detailpage&v=iWKgwqIS8w4[/video] Listen to him tuning unisons and octaves. Always strive for a clean, clear unison and octave - no 'waves' or 'wobbles'. Good luck!
|
|
|
|
Joined: Mar 2009
Posts: 2,571
2000 Post Club Member
|
2000 Post Club Member
Joined: Mar 2009
Posts: 2,571 |
By now you should be doing a decent tuning. I can't help thInking that you might be doing a good tuning but, because of the lever technique you lectured us about in your last video, I can hear the piano going out of tune while you spend the first half of this particular video talking.
In your favor, I have yet to find a uTube demonstration of a good classic tuning technique using the thumb as a fulcrum that you can learn from. It seems that the ones who really know how to tune either don't know how to put a video on line or simply can't be bothered.
"The stuff on the web these days is actively preventing raw talent from developing"----discuss....
Amanda Reckonwith Concert & Recording tuner-tech, London, England. "in theory, practice and theory are the same thing. In practice, they're not." - Lawrence P. 'Yogi' Berra.
|
|
|
|
Joined: Jun 2011
Posts: 3,713
3000 Post Club Member
|
OP
3000 Post Club Member
Joined: Jun 2011
Posts: 3,713 |
By now you should be doing a decent tuning. I can't help thInking that you might be doing a good tuning but, because of the lever technique you lectured us about in your last video, I can hear the piano going out of tune while you spend the first half of this particular video talking.
In your favor, I have yet to find a uTube demonstration of a good classic tuning technique using the thumb as a fulcrum that you can learn from. It seems that the ones who really know how to tune either don't know how to put a video on line or simply can't be bothered.
"The stuff on the web these days is actively preventing raw talent from developing"----discuss.... I'm sorry but I absolutely do not understand what you mean. If you think that Max is not able to tuning of a piano, then it is your right
|
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
Forums43
Topics223,405
Posts3,349,434
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|