|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
65 members (BWV846, Anglagard44, clothearednincompo, brdwyguy, amc252, Bellyman, 16 invisible),
2,249
guests, and
382
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Apr 2012
Posts: 61
Full Member
|
OP
Full Member
Joined: Apr 2012
Posts: 61 |
I had a warranty job on a 1980 Baldwin console today. Been in customers house for a little over a month now, I tuned it shortly before it left the store. At this time played and sounded great. Was called to the customers house because of a knocking sound, I figured pencil or something easy etc... Turns out all, every single bit of buckskin from hammer butt buckskin, to backcheck buckskin was rock hard. It seriously felt like concrete. Customer stated that she heard nothing for about two weeks after getting piano then almost over night started hearing the clicking. I have seen plenty of buckskin that was worn overtime etc... but nothing like this. Her house was at 72 degrees and 41% Humidity. The tuning was still almost spot on. What could cause this? Remedy?
Last edited by pianotune2; 02/07/13 10:54 PM.
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
Baldwin made a boat load of this stuff and it is called "corfam." It is basically fake leather. The correct procedure is replacing all of the buckskin. Hammer butt leathers and butt heel leathers. It is a lot of work. I would venture a guess that perhaps someone in the store needled the leather enough to make the sound go away possibly, but that will not last. Replacement is the only hope for it.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Apr 2012
Posts: 61
Full Member
|
OP
Full Member
Joined: Apr 2012
Posts: 61 |
Thanks for the info. I tried to needle it and couldn't hardly get a needle in it. Do they make any type of softener, for leather etc... that might work.
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
To my knowledge no. Especially because this stuff is not leather. That was one of Baldwins biggest mistakes was installing the Corfam. There are tens of thousands of pianos out there with that stuff in them. It was a disaster.
As bad as it sounds, your best bet is to replace them all. You will have a happy customer then.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Oct 2004
Posts: 1,205
1000 Post Club Member
|
1000 Post Club Member
Joined: Oct 2004
Posts: 1,205 |
Dale Fox Registered Piano Technician Remanufacturing/Rebuilding
|
|
|
|
Joined: Apr 2010
Posts: 2,326
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2010
Posts: 2,326 |
To my knowledge no. Especially because this stuff is not leather. That was one of Baldwins biggest mistakes was installing the Corfam. There are tens of thousands of pianos out there with that stuff in them. It was a disaster.
As bad as it sounds, your best bet is to replace them all. You will have a happy customer then.
This the correct repair. I was a Baldwin dealer at the time -- in addition to being a technician. They sent out handy kits to do the job. It really isn't that bad to do. It can be even be done without removing the hammer butts. Whether that is any faster depends on what tools you have and how dexterous you are. It does save a bit of re-alignment.
Keith Akins, RPT Piano Technologist USA Distributor for Isaac Cadenza hammers and Profundo Bass Strings Supporting Piano Owners D-I-Y piano tuning and repair editor emeritus of Piano Technicians Journal
|
|
|
|
Joined: Sep 2006
Posts: 3,983
3000 Post Club Member
|
3000 Post Club Member
Joined: Sep 2006
Posts: 3,983 |
I would be tempted to replace the butts - lock, stock and barrel. Those parts were crappy from the start, let's face it. The old hammers were most often hardened to a rock-like state. Put in nice new butts and hammers. The thing could finally feel, sound and play like a musical instrument. (not a big fan of those clangy boxes) Oh, yikes, did you say Warranty Tuning? I hope they don't shoot the messenger.
JG
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
is not it a polyurethane material ?
did you try PU solvent to soften the material ? just for the experiment, it certainly should not last even if it works.
Last edited by Olek; 02/08/13 06:15 AM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
Why waste the time and energy Isaac if it isn't going to work anyway.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
just curious, the Ecsaine we use today is a microfiber polyurethane, I wondered of any future instability of the product (but does not seem to be the case )
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Dec 2012
Posts: 6,714
6000 Post Club Member
|
6000 Post Club Member
Joined: Dec 2012
Posts: 6,714 |
I believe the elasticisers, (sp?) in escaine are much more stable than the corfam. I have seen 25YO escaine that felt like new. But a real organic chemist from the fabric industry could tell us more authoritatively.
In a seemingly infinite universe-infinite human creativity is-seemingly possible. According to NASA, 93% of the earth like planets possible in the known universe have yet to be formed. Contact: toneman1@me.com
|
|
|
|
Joined: Apr 2012
Posts: 61
Full Member
|
OP
Full Member
Joined: Apr 2012
Posts: 61 |
Thanks everyone for the info. The customer has decided to trade the piano back in on a new Kawai. Owner of the piano store has not decided what he wants to do on the Baldwin. I can't believe I have never run across this before, but at least now I know for the future.
|
|
|
|
Joined: Sep 2006
Posts: 3,983
3000 Post Club Member
|
3000 Post Club Member
Joined: Sep 2006
Posts: 3,983 |
Sounds like it worked out amazingly well for the dealer - instead of selling a 30+ year old clacker, he was able to sell a new piano. Better for the client as well. And better for the technician, not having to deal with the corfam. At least this time around. A win-win-win situation.
JG
|
|
|
|
Joined: Jun 2003
Posts: 32,060
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Jun 2003
Posts: 32,060 |
Except the dealer is stuck with a piano that may cost more to make acceptable than he can sell it for,
Semipro Tech
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
I suggest we give each a little money to help that dealer
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Nov 2007
Posts: 6,828
6000 Post Club Member
|
6000 Post Club Member
Joined: Nov 2007
Posts: 6,828 |
Except the dealer is stuck with a piano that may cost more to make acceptable than he can sell it for, Hahaha. I feel sorry for the dealer... NOT! It's great that the dealer took it back and it was definately a win win for both of them, no doubt about that but, I find it mighty hard to believe the dealer wasn't aware of these Baldwin problems seeing as it is so wide spread. The dealer has choices. Fix it and sell it for more, taking a little loss but, perhaps not because: A: He probably only pays his technicians $15 an hour so if it took them 10 hours to fix it (an exaggeration in time but easier to figure) it would only cost him give or take, $150.00. Double that and he's made something on that part of it. B: He sold them a new piano so that makes up some of the loss if he has any at all. C: Trash it. It should never have been sold in that condition in the first place and frankly, I find it hard to believe it didn't start clacking until 2 weeks after delivery.... Something fishy in the tank about that one to me.... Any Baldwin I encounter with that stuff on it NOW always clacks.
Jerry Groot RPT Piano Technicians Guild Grand Rapids, Michigan www.grootpiano.comWe love to play BF2.
|
|
|
|
Joined: Apr 2008
Posts: 2,481
2000 Post Club Member
|
2000 Post Club Member
Joined: Apr 2008
Posts: 2,481 |
Just a question in relation to this.... is corfam the only synthetic buckskin out there or are there other types which don't have this problem? I got a few rolls of the synthetic buckskin from years back, never used it for anything yet and it still feels fairly soft. Does corfam get hard from use, or just from age, or both?
Piano Technician George Brown College /85 Niagara Region
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
No it is an old product, what you may have can be Ecsain or other similar microfiber. No problems in time for what I know. Widely used, it is easier than finding the correct leather
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
|
Joined: Dec 2009
Posts: 389
Full Member
|
Full Member
Joined: Dec 2009
Posts: 389 |
It went something like this.... Baldwin marketing people were sitting around in the think tank brainstorming over the 3 cent extra cost of leather scrap when... Behold ! Ricardo Montlaban popped up on TV with his " Rich Corinthian Leather" Chrysler Cordoba commercials... The rest as we know it was history.
J. Christie Nashville Piano Rescue www.NashvillePianoRescue.comEast Nashville Bowling Green, KY Scottsville KY. Chamber of Commerce Member/Sponsor Putting inspiration in the hands of area musicians Through restoration/renovation
|
|
|
|
Joined: Mar 2008
Posts: 9,230
9000 Post Club Member
|
9000 Post Club Member
Joined: Mar 2008
Posts: 9,230 |
Corfam have been used for shoes at those times, they all cracked after some months of use so the problems with the product where known soon, I suppose. Finding similar leather qualities than the one we found in old instruments certainly became very difficult at some point. Between a hard leather that is noisy and need numerous talcum/teflon application to be fine, and a syntehtic product that is used by Yamaha since 2 or 3 decades, I prefer the last (and there is some kind of "nap orientation" See the yamaha backchecks, they dont wear particularely fast. OK not at all the quality of the extra thick buckskin of older Steinways, but OK for me (expensive, it is )
Last edited by Olek; 02/09/13 03:00 PM.
Professional of the profession. Foo Foo specialist I wish to add some kind and sensitive phrase but nothing comes to mind.!
|
|
|
Forums43
Topics223,403
Posts3,349,419
Members111,636
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|