|
Welcome to the Piano World Piano Forums Over 3 million posts about pianos, digital pianos, and all types of keyboard instruments. Over 100,000 members from around the world.
Join the World's Largest Community of Piano Lovers
(it's free)
It's Fun to Play the Piano ... Please Pass It On!
|
|
79 members (AaronSF, apianostudent, beeboss, brdwyguy, benkeys, Abdulrohmanoman, accordeur, 19 invisible),
2,267
guests, and
433
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Joined: Apr 2007
Posts: 17,391
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Apr 2007
Posts: 17,391 |
I've always been surprised at how many boards put their headphone jacks in the back, it's obviously the "wrong" place. It's more difficult to plug it in, you have to take more care to route the wire out of your way while playing. It's not like you're ever listening from that side of the board. I guess it's just sometimes cheaper to make it that way. The headphone Jack is on the front, but the USB plug is on the back... Annoying, but you can certainly buy a USB port extender cable, so it's not the end of the world.
private piano/voice teacher FT
|
|
|
|
Joined: Nov 2009
Posts: 286
Full Member
|
Full Member
Joined: Nov 2009
Posts: 286 |
Oups I have just find another little issue (bug ??) the Key Touch setting is not saved in memory and after having switched off-on the piano, you always get the default value Again, it is not a big deal, but here, I think Roland will probably release a Patch Update But I am not sure Patch can be applied to the Rolands DP.. anyone knows ?
Music is a lifestyle (Happy Yamaha N2 and Roland FP90 owner)
|
|
|
|
Joined: Jul 2010
Posts: 1,482
1000 Post Club Member
|
1000 Post Club Member
Joined: Jul 2010
Posts: 1,482 |
Oups I have just find another little issue (bug ??) the Key Touch setting is not saved in memory and after having switched off-on the piano, you always get the default value Again, it is not a big deal, but here, I think Roland will probably release a Patch Update But I am not sure Patch can be applied to the Rolands DP.. anyone knows ? Firmware can always be updated - if that is what you mean.... Question is "if" and for how long a company wants to support it's product by FW updates with bug fixes and new features. Some brands are better at this (e.g. Kurzweil updates it's firmware for years) than others (Studiologic , Roland (?))
|
|
|
|
Joined: Nov 2009
Posts: 286
Full Member
|
Full Member
Joined: Nov 2009
Posts: 286 |
Oups I have just find another little issue (bug ??) the Key Touch setting is not saved in memory and after having switched off-on the piano, you always get the default value Again, it is not a big deal, but here, I think Roland will probably release a Patch Update But I am not sure Patch can be applied to the Rolands DP.. anyone knows ? Firmware can always be updated - if that is what you mean.... Question is "if" and for how long a company wants to support it's product by FW updates with bug fixes and new features. Some brands are better at this (e.g. Kurzweil updates it's firmware for years) than others (Studiologic , Roland (?)) Are you sure that Firmware can always be update by simple users ?? Companies my "block" this function and require a technician I am saying that as I have not found any Firmware update for the FP-7F for example, on the Roland site...
Last edited by enzo.sandrolini; 05/08/13 12:30 PM.
Music is a lifestyle (Happy Yamaha N2 and Roland FP90 owner)
|
|
|
|
Joined: Feb 2013
Posts: 268
Full Member
|
OP
Full Member
Joined: Feb 2013
Posts: 268 |
Why is the USB port in the back? On my FP-7 it's in the front which makes much more sense (or does the FP-80 have front & back ports?).
There are two ports on the back. One is for a USB stick and the other to a computer. On the stick you can save songs in WAV or SMF. To the computer it (only) sends MIDI.
Cheers, Lenny
------------------------------------------------------------------------------------ FP-80, synths, guitars, mics, MBP, interfaces, Voicelive 2, ableton, Pianoteq, nubert a-200
|
|
|
|
Joined: Feb 2013
Posts: 268
Full Member
|
OP
Full Member
Joined: Feb 2013
Posts: 268 |
Oups I have just find another little issue (bug ??) the Key Touch setting is not saved in memory and after having switched off-on the piano, you always get the default value Again, it is not a big deal, but here, I think Roland will probably release a Patch Update But I am not sure Patch can be applied to the Rolands DP.. anyone knows ? You can save the touch in the registrations (for some strange reason). Look in the manual on page 57 'Saved Settings' shows what is saved where.
Cheers, Lenny
------------------------------------------------------------------------------------ FP-80, synths, guitars, mics, MBP, interfaces, Voicelive 2, ableton, Pianoteq, nubert a-200
|
|
|
|
Joined: Nov 2009
Posts: 286
Full Member
|
Full Member
Joined: Nov 2009
Posts: 286 |
Oups I have just find another little issue (bug ??) the Key Touch setting is not saved in memory and after having switched off-on the piano, you always get the default value Again, it is not a big deal, but here, I think Roland will probably release a Patch Update But I am not sure Patch can be applied to the Rolands DP.. anyone knows ? You can save the touch in the registrations (for some strange reason). Look in the manual on page 57 'Saved Settings' shows what is saved where. Yep, you are right... really strange behavior They might have thought that Touch is related the type of instrument you play, while "Piano design" is for all... (I am not convinced by my arguments..)
Music is a lifestyle (Happy Yamaha N2 and Roland FP90 owner)
|
|
|
|
Joined: Feb 2010
Posts: 6,730
6000 Post Club Member
|
6000 Post Club Member
Joined: Feb 2010
Posts: 6,730 |
Are you sure that Firmware can always be update by simple users ?? No, not all keyboards are designed to be able to be updated by end users (or, possibly, at all). And of course, even if the capability is there, that doesn't mean it will ever be used. As has been mentioned, Roland is worse than average in providing updates to existing instruments. Regardless, I wouldn't suggest buying any keyboard that doesn't work in a way you find acceptable out of the box. There's never a guarantee it will ever be better.
|
|
|
|
Joined: Nov 2009
Posts: 286
Full Member
|
Full Member
Joined: Nov 2009
Posts: 286 |
Are you sure that Firmware can always be update by simple users ?? Regardless, I wouldn't suggest buying any keyboard that doesn't work in a way you find acceptable out of the box. There's never a guarantee it will ever be better. You are right, but I am talking here about little issue (if they can be called like that, as this behavior might be "strange", but is described in the manual...) Don't misunderstand me, I really enjoy this DP
Music is a lifestyle (Happy Yamaha N2 and Roland FP90 owner)
|
|
|
|
Joined: Nov 2006
Posts: 73
Full Member
|
Full Member
Joined: Nov 2006
Posts: 73 |
As on my FP4 I believe the Key Touch is only saved in a Registration. This if from the FP-80 manual below in regard to the parms. that are saved in a Registration:
Settings Saved in Registrations Setting Explanation Page – Selected tone p. 14 – Dual play on/off p. 14 – Tone 1/Tone 2 (Dual play) p. 14 – Split play on/off p. 15 – Right-hand tone/Left-hand tone (Split play) p. 15 – Split point p. 15 – Transpose’s on or off, its value, and Transpose mode p. 19 – Ambience on/off and depth p. 17 – The Volume balance between the keyboard performance and the accompaniment p. 8 – Rotary effect’s pulse speed p. 14 Modulation Speed Speed of sound modulation p. 14 Key Touch Key touch p. 18 Rhythm Rhythm settings p. 20 Edit Tone Wheel Settings for each tone wheel organ p. 32 Dual Balance Dual balance p. 45 Split Balance Split balance p. 45 Audio Transpose Audio transpose p. 25 Transpose Mode Transpose mode p. 44 Octave Shift Octave shift p. 45 Damper Pedal Part Setting for the damper pedal part p. 45 Center Pedal Part Setting for the center pedal part p. 46 Center Pedal Func Function of the center pedal p. 46 Left Pedal Part Setting for the left pedal p. 46 Left Pedal Func Function of the left pedal p. 46 MIDI Transmit Ch. MIDI transmi Regist. Tx Ch. Program change data p. 47 Regist. PC Regist. Bank MSB Regist. Bank LSB Split On Chord Recognize Split on chord recognize p. 45 Chord Prog. Root Chord progression root p. 45 Mic Ambience Mic ambience p. 35 – Harmony on/off setting p. 34 Harmony Type Harmony type p. 35 Harmony Level Harmony volume p. 34
Last edited by legatoboy; 05/08/13 01:09 PM.
Yamaha YUX Upright, Yamaha CP50, Roland FP-80, Pianoteq Stage, Yamaha P-105, Hammond XK-2, Korg CX-3 (ver.2), Leslie 145 w/Speakeasy PreAmp , 1964 Hammond B3/122RV Leslie
|
|
|
|
Joined: Apr 2007
Posts: 17,391
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Apr 2007
Posts: 17,391 |
Why is the USB port in the back? On my FP-7 it's in the front which makes much more sense (or does the FP-80 have front & back ports?).
There are two ports on the back. One is for a USB stick and the other to a computer. On the stick you can save songs in WAV or SMF. To the computer it (only) sends MIDI. Right, my complaint is that if you are using one for a usb stick, then you constantly have to reach around the back to take it in and out, whereas one on the front makes much more sense. My Fp-7 has the USB port in front, so I wonder why the FP-80 does not.
private piano/voice teacher FT
|
|
|
|
Joined: Jan 2013
Posts: 311
Full Member
|
Full Member
Joined: Jan 2013
Posts: 311 |
Why is the USB port in the back? On my FP-7 it's in the front which makes much more sense (or does the FP-80 have front & back ports?).
There are two ports on the back. One is for a USB stick and the other to a computer. On the stick you can save songs in WAV or SMF. To the computer it (only) sends MIDI. Right, my complaint is that if you are using one for a usb stick, then you constantly have to reach around the back to take it in and out, whereas one on the front makes much more sense. My Fp-7 has the USB port in front, so I wonder why the FP-80 does not. Because in the place where FP7F had USB port the FP 80 has speakers? Can't think of any other reason.
|
|
|
|
Joined: Jan 2013
Posts: 311
Full Member
|
Full Member
Joined: Jan 2013
Posts: 311 |
Just to inform you: It is not possible to save the Piano Designer edits in the Registers. That means once you edit and save your designed piano into memory, that's it. It is not possible to compare or play the different pianos you've edited. I was hoping on making different character style sounding pianos to be switched in the registry. Also, the Piano Designer has always influence on all three first Pianos : Concert, Ballade and Bright. Meaning: any changes made will affect all of these. Just wanted to share my discoveries... Accroding to the manual, Piano Designer settings cannot be stored in Registration but can be saved by Memory Backup - meaning that when you turn on the piano, your settings will be set, not the default values.
|
|
|
|
Joined: Mar 2013
Posts: 39
Full Member
|
Full Member
Joined: Mar 2013
Posts: 39 |
I like all external connectors on the back, so if I have something connected (a computer or external input) the cables aren't dangling out the front, getting in the way of playing and looking unsightly.
Just an alternate point of view.
|
|
|
|
Joined: Apr 2007
Posts: 17,391
Yikes! 10000 Post Club Member
|
Yikes! 10000 Post Club Member
Joined: Apr 2007
Posts: 17,391 |
I like all external connectors on the back, so if I have something connected (a computer or external input) the cables aren't dangling out the front, getting in the way of playing and looking unsightly.
Just an alternate point of view. Oh, I agree, except for the USB port where you are putting a stick in there to record and then taking that stick to your computer a lot (since the USB cable will only do MIDI, and not audio to). So this is all in response to that. It makes sense that the addition of those other 2 speakers prevented them from continuing this design in the FP-80. From what I can tell with the FP-80, it's not enough of an improvement to upgrade from the FP-7. Are there any posters here who did that and were happy with the changes?
private piano/voice teacher FT
|
|
|
|
Joined: Feb 2013
Posts: 268
Full Member
|
OP
Full Member
Joined: Feb 2013
Posts: 268 |
Another tip:
To change the Leslie/Rotary effect from slow to fast and vice versa while playing an organ, press the organ button.
What's sad, it can not be assigned to a pedal.
Last edited by Cmin; 05/10/13 06:39 AM.
Cheers, Lenny
------------------------------------------------------------------------------------ FP-80, synths, guitars, mics, MBP, interfaces, Voicelive 2, ableton, Pianoteq, nubert a-200
|
|
|
|
Joined: Jul 2010
Posts: 1,482
1000 Post Club Member
|
1000 Post Club Member
Joined: Jul 2010
Posts: 1,482 |
What's sad, it can not be assigned to a pedal.
That would be toooo much 2013 ;-) Afterthought: Strange that starting from my early 90's instruments complex routings and control assignments we're always standard (Kurzweil , Korg) and then things started to fall apart with later products that became often less flexible and had less control features. I know it's a bit apple&pears, but hey....they could have done a better job living in the 21st century. Apart from the sound and touch , which are great.
|
|
|
|
Joined: Feb 2010
Posts: 6,730
6000 Post Club Member
|
6000 Post Club Member
Joined: Feb 2010
Posts: 6,730 |
Afterthought: Strange that starting from my early 90's instruments complex routings and control assignments we're always standard (Kurzweil , Korg) and then things started to fall apart with later products that became often less flexible and had less control features. On a related note, with many products, I've noticed there seems to be a cycle where, first they come out with the technology, then they spend some product cycles improving the technology, and after that they only seem concerned with finding ways to cheapen it. VCRs, for example. First they were okay and expensive, then they kept getting better and cheaper, and then finally they started getting worse and cheaper.
|
|
|
|
Joined: Dec 2009
Posts: 4,675
4000 Post Club Member
|
4000 Post Club Member
Joined: Dec 2009
Posts: 4,675 |
On a related note, with many products, I've noticed there seems to be a cycle where, first they come out with the technology, then they spend some product cycles improving the technology, and after that they only seem concerned with finding ways to cheapen it. VCRs, for example. First they were okay and expensive, then they kept getting better and cheaper, and then finally they started getting worse and cheaper. With DPs, I believe much of the degradation in the feature set is due to a fundamental shift in programming techniques. The earlier ones were probably hand coded in assembly by engineers, and they likely needed many of the features for testing. But bean counters are now watching SW development like a hawk, making a lot of free software actually better than the professionally dashed out variety.
|
|
|
|
Joined: Nov 2012
Posts: 1,499
1000 Post Club Member
|
1000 Post Club Member
Joined: Nov 2012
Posts: 1,499 |
|
|
|
|
|
|
Piano
by Gino2 - 04/17/24 02:34 PM
|
Piano
by Gino2 - 04/17/24 02:23 PM
|
|
Forums43
Topics223,405
Posts3,349,434
Members111,637
|
Most Online15,252 Mar 21st, 2010
|
|
|
|
|
|