Welcome to the Piano World Piano Forums
Over 2 million posts about pianos, digital pianos, and all types of keyboard instruments
Join the World's Largest Community of Piano Lovers (it's free)
It's Fun to Play the Piano ... Please Pass It On!

SEARCH
the Forums & Piano World

This custom search works much better than the built in one and allows searching older posts.
(ad 125) Sweetwater - Digital Keyboards & Other Gear
Digital Pianos at Sweetwater
(ad) Pianoteq
Latest Pianoteq add-on instrument: U4 upright piano
(ad) Pearl River
Pearl River Pianos
(ad) P B Guide
Acoustic & Digital Piano Guide
PianoSupplies.com (150)
Piano Accessories Music Related Gifts Piano Tuning Equipment Piano Moving Equipment
We now offer Gift Certificates in our online store!
(ad) Estonia Piano
Estonia Piano
Quick Links to Useful Stuff
Our Classified Ads
Find Piano Professionals-

*Piano Dealers - Piano Stores
*Piano Tuners
*Piano Teachers
*Piano Movers
*Piano Restorations
*Piano Manufacturers
*Organs

Quick Links:
*Advertise On Piano World
*Free Piano Newsletter
*Online Piano Recitals
*Piano Recitals Index
*Piano Accessories
* Buying a Piano
*Buying A Acoustic Piano
*Buying a Digital Piano
*Pianos for Sale
*Sell Your Piano
*How Old is My Piano?
*Piano Books
*Piano Art, Pictures, & Posters
*Directory/Site Map
*Contest
*Links
*Virtual Piano
*Music Word Search
*Piano Screen Saver
*Piano Videos
*Virtual Piano Chords
Topic Options
#622888 - 06/07/01 04:45 PM coilers
Jason Offline
Junior Member

Registered: 06/07/01
Posts: 5
how do I use a hand-held coil maker? Thanks a lot

Top
(ad PTG 568) Win a Year Journal Subscription
PTG 57th Annual Convention - Atlanta
#622889 - 06/08/01 08:50 AM Re: coilers
Bob Offline
3000 Post Club Member

Registered: 06/01/01
Posts: 3833
Assuming you mean the device to coil the string around the tuning pin while stringing a piano, the proceedure is as follows:

Insert tuning pin in the hole in cylinder, top side up and adjust the screw at the bottom of the cylinder so the hole in the tuning pin is just above the top of the cylinder. Lock screw in place.

Insert piano wire into hole in tuning pin flush with other side of pin. Wire should not stick out other side of pin.

Position wire so it rests against right side of small screw at top of cylinder.

Put tuning pin crank on to tuning pin, and turn pin clockwise about 2 1/2 turns.

Wire will wind neatly around tuning pin.

Remove tuning pin from cylinder and pound into pinblock
_________________________
www.PianoTunerOrlando.com






Top
#622890 - 06/09/01 03:09 AM Re: coilers
Jason Offline
Junior Member

Registered: 06/07/01
Posts: 5
Thanks a lot for your help. I have another question; Is there any way to fix a bridge with small cracks in it near the bridge pins without having to replace the cap or the pins? There probably is no easy way to do this but thanks anyway. Jason

Top
#622891 - 06/10/01 10:53 PM Re: coilers
Bob Offline
3000 Post Club Member

Registered: 06/01/01
Posts: 3833
Well, you can fill the cracks with epoxy, but it can get messy. I've seen super glue used instead, but it really isn't strong enough to work. The black stuff on the bridge is called dag, and comes in a bottle from the supply house. You can mix this with the epoxy to create a black patching material. If you use a small screwdriver to apply it to the cracks and have a cloth handy to wipe off any excess, you should be ok
_________________________
www.PianoTunerOrlando.com






Top
#622892 - 06/11/01 12:37 AM Re: coilers
Jason Offline
Junior Member

Registered: 06/07/01
Posts: 5
That's a really good idea, thanks. I have another question (I'm just full of questions); how might I go about re-bronzing a plate? Thanks alot for your help, Jason

Top
#622893 - 06/29/01 01:19 PM Re: coilers
Don Affleck Offline
Junior Member

Registered: 06/29/01
Posts: 9
Loc: Kelowna, British Columbia, Can...
Jason,

If you use epoxy to repair the bridge, the excess can easily be removed by brushing it with lacquer thinner. The lacquer thinner dissolves the epoxy making it easy to clean up.

On re-bronzing a plate - you can simply wash the plate down with soap & water ( after it is removed from the piano), then spray it with a gold lacquer spray bomb. You could also re-do the lettering with a fine brush & black enamel.
_________________________
Affleck Piano Tuning
http://www.affleckpianotuning.com
webmaster@affleckpianotuning.com

Top
#622894 - 01/09/02 03:10 AM Re: coilers
Littlebit Offline
Full Member

Registered: 12/23/01
Posts: 62
Loc: CA
Hi,
Does patching a bass bridge require removing the strings.

Stupid question?

Any comments on my bridge?

[ January 09, 2002: Message edited by: Littlebit ]

Top
#622895 - 01/09/02 09:08 AM Re: coilers
PNO2NER Offline
Full Member

Registered: 11/26/01
Posts: 128
Loc: Traverse City, MI
The bridge pictured is a good candidate for superglue repair. The cracking and splitting is apparent, but has not progress to a point where it is not repairable. Loosen each bass tuning pin about 1 turn leaving the string connected. Starting with the lowest string, remove each one from its hitch pin. Keep them in order by stringing them one by one on a piece of heavy wire. A coathanger will do. Remove all the bridge pins and keep handy for re-use. Starting at one end of the bridge, using medium thickness cyanoacrylate adhesive (super glue available at hobby shops) squeeze enough in one hole at a time to fill the hole. Then with a small hammer, lightly tap the pin back into the hole to the same as original height. This will squeeze the glue into the crack where it solidifies and restores the integrity of the bridge. Clean off excess as you go, as it dries quickly. I have repaired over 20 of these this way with success in every case. If you want a video on the procedure, go to www.ptg.org where you will find it. Of course, replace all the strings in order, being careful to give each string a twist in the direction of the windings before installing on the hitch pin. This will minimize buzzing noises from the bass strings. Good Luck!

Top
#622896 - 01/09/02 09:49 AM Re: coilers
SamLewisPiano.com Offline
500 Post Club Member

Registered: 08/19/01
Posts: 635
Loc: WHITE BLUFF (Nashville area) T...
I'm in agreement with PNO2NER. Just want to add that you can get the epoxy or superglue to flow better by gently heating the bridge (use a hair dryer) prior to adding the glue.......Sam
_________________________
Since 1975; Full-time piano tuner/tech in Nashville;
Lacquer and polyester specialist.

www.SamLewisPiano.com

Top
#622897 - 01/09/02 12:04 PM Re: coilers
Littlebit Offline
Full Member

Registered: 12/23/01
Posts: 62
Loc: CA
Thanks so you actually fill the holes with the glue and reset the pins.
Does this effect the sound as the pins are now totally soldered in a glue?

I am hesitant to do anything at this point but I am considering in the future.
I just had the piano tuned yesterday so I'll just see how she stays tuned and deal with it before/ during the next tuning.

It almost looks like it would be better if you could get a syringe with an appropriate
glue and with a needle fill the crack between
the pins. Does anyone know the plausibility of this?

She's an old piano and was tuned already at A438 so it was tuned there.
Please forgive me for repeating myself as I have not read the other posts yet but could tuning a piano to A438 that was designed (most likely) for A435 have caused additional stress enough to have caused this crack or are they unrelated?

Thanks

Top
#622898 - 01/10/02 06:59 AM Re: coilers
PNO2NER Offline
Full Member

Registered: 11/26/01
Posts: 128
Loc: Traverse City, MI
Hi Littlebit: The cracking between the bridge pins in almost every case is caused by the piano being exposed to a heat source at some time in its life. Higher string tension would not be the reason. The high temperature (and accompanying low humidity) has dried the wood and caused it to shrink and crack. Your idea of injecting adhesive with a syringe sounds good, but may not be very effective in getting down deep into the cracks. Certainly better than nothing. Don't worry about the pins being permanently "welded" into the bridge, thats what you want-a good bond between pin and bridge to effectively transmit the vibrations of the strings into the bridge and on into the soundboard. Looking at your picture closely, I would estimate that this condition has existed for years, and may not get appreciably worse for many more. At this point I would go into "watchful neglect" mode. Examine the area a couple of times a year, and if it gets worse, then take measures to correct. I would tune the piano to A440, the slight difference in string tension will have little or no effect especially in the bass area, and you will be playing at standard pitch.

Top
#622899 - 01/10/02 11:56 AM Re: coilers
Littlebit Offline
Full Member

Registered: 12/23/01
Posts: 62
Loc: CA
That's welcome advice, I'll have to get that digital humidity gauge from radio shack and see what I have. I live in southern CA in the SF valley which is not too coastal and on the dry side. I estimate and hope I have the ideal conditions humidty wise 35-45 %.
If it's really off I'll hhave to see what I can do to keep the piano stable.

She was built in Montreal and must have spent half of her life there since I found a 1964 canadian penny under the keyboard, then she probably had her life in California.
I am not familiar with Montreal climate and don't know how bad it is on pianos. The piano has been well taken care off upon physical inspection and it was exceptionably
clean even the hammers for it's age.
Also the strings are shiny with no rust as are all the metal parts.

So lets hope I can squeeze more life out of her. She still sounds good to me. I like the A 438 I might stay with it. It might lend a mellow round tone not as bright. Is there much perceptable difference between 438 and 440? The tuner said it would cost two tuners to get it up to 440 does this sound correct?

Thanks for the help \:\)

Littlebit

Top
#622900 - 01/11/02 07:55 AM Re: coilers
PNO2NER Offline
Full Member

Registered: 11/26/01
Posts: 128
Loc: Traverse City, MI
Hi Again: Sounds like you have a winner there, many older pianos are far superior to those produced today. The environment within a home where a piano resides is equally as important as the climate outside. So, you may never know what the conditions were that the piano saw. 438 to 440 is about an 8% change in pitch, slightly noticeable to the trained ear, however if the whole piano is tuned that way, it's not noticeable until another instrument or recording at 440 is played along with it. It is common to raise pitch even further than this, what the technician is saying is that it won't be stable and stay in tune for a good length of time until two tunings have been done. Strings tend to stretch and drift back to where they started. Stay with it...

Top
#622901 - 01/11/02 04:38 PM Re: coilers
Littlebit Offline
Full Member

Registered: 12/23/01
Posts: 62
Loc: CA
Hi,

Thanks, this is my first piano and tuning.
My parents never tuned the old player piano I learned on. This piano according to the tech appeared to be tuned to 438 and wasn't too out of tune. So my guess it had been tuned less than 20 years ago. LOL

I don't know the logistics of tuning but maybe this tech meant he'd bring it up to 439
and than to 440. The strings still look almost new but they may be very old. Probably
70 years old so maybe it's best to leave them. he also said the pianos of it's age were probably designed for 435 so I am happy with 438.

I'm sure if it were a newer piano you might raise it all at once. If he would have tried to raise it to 440 is it possible I might have had a problem. It won't be recorded with
other instruments so it is ok with me.

Thanks for the advice,
Littlebit

also have to remember bassbridge problem ;\)



[ January 11, 2002: Message edited by: Littlebit ]

Top

Moderator:  Piano World 
What's Hot!!
> Robin Spielberg Playing in Maine! <
-------------------
75,000 Members and Growing!
-------------------
HOW TO POST PICTURES on the Piano Forums
-------------------
Sharing is Caring!
About the Buttons
-------------------
Forums Rules & Help
-------------------
ADVERTISE
on Piano World

The world's most popular piano web site.
Ad (Seiler/Knabe)
Seiler Pianos
(ad) HAILUN Pianos
Hailun Pianos - Click for More
Sheet Music
(PW is an affiliate)
Sheet Music Plus Featured Sale
(125ad) Dampp Chaser
Dampp Chaser Piano Life Saver
(ad) Lindeblad Piano
Lindeblad Piano Restoration
Who's Online
64 registered (Allard, AndrewJCW, barbaram, Al LaPorte, a-z0-9, beeboss, 17 invisible), 1403 Guests and 18 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
75473 Members
42 Forums
156050 Topics
2291492 Posts

Max Online: 15252 @ 03/21/10 11:39 PM
New Topics - Multiple Forums
My fingers know what my brain has forgotten
by PatrickBl
Yesterday at 08:30 PM
Fully-Rebuilt Pianos Versus New Pianos
by Paul678
Yesterday at 08:12 PM
How do you identify the melody on a sheet of music?
by Alex1
Yesterday at 07:38 PM
Fugue in b Minor
by Ritzycat
Yesterday at 05:34 PM
Missing Pedal rods for Bramburg (1890-ish?)
by Paul678
Yesterday at 04:22 PM
(ads by Google)

Visit our online store for gifts for music lovers

 
Our Piano Related Classified Ads
| Dealers | Tuners | Lessons | Movers | Restorations | Pianos For Sale | Sell Your Piano |

Advertise on Piano World
| Subscribe | Piano World | PianoSupplies.com | Advertise on Piano World | Donate | Link to Us | Classifieds |
| |Contact | Privacy | Legal | About Us | Site Map | Free Newsletter | Press Room |


copyright 1997 - 2014 Piano World ® all rights reserved
No part of this site may be reproduced without prior written permission