I have a customer with a Kimball electramatic spinnet player. Some of the plastic valves have come loose frome the stack. What should I use to glue these back on, and is it possible to find new valves should I need them or can these be disassembled without destroying them. Thanks.

I haven't seen one of these in quite awhile so I'm not up-to-date, what we used to use on Aeolian-American valves was Duco cement. New A-E valves are available, but Kimballa are pretty doubtful.

Tom

From the 1990 Centennial Issue of The Piano Trades, "In 1963, Wood & Brooksmattempted to bring easy-play features to the piano with the introduction of the Electra-Chord, a complex electro-mechanical device that made it possible to play one-finger chords. Charles Woods, Wood & Brooks president, claimed that Electra-Chord would 'forever change the piano industry.' Instead, it flopped badly because it was too costly and prone to service problems."
There is also a reference to "Electrachoed & Piano Sales" in the August 1961 issue of The Piano Technicians Journal, p.15. I do not have the issue at hand, lost a lot of old issues moving and in storage.

Tom

The above belongs to the next posting on this forum. Sorry 'bout that. Still looking for some Kimball info.

Tom

Do this: go to Mechanical Music Digest (MMD)>Archive>Kimball. Plenty of info on Kimball Electromatics, repairs, replacement part sources, tubing diagram, etc. Valuable resource for players.

Tom