Behringer CDP2400USB Pedal Cable Schematic

Posted by: Zeph55

Behringer CDP2400USB Pedal Cable Schematic - 05/11/11 04:37 PM

Hi!
So, the kid's lesson book fell off the back of the Piano Keyboard and guillotined the cable that leads from the port on the back of the unit to the foot pedals. (Behringer CDP2400USB)

I tried to be careful on slicing the end open so that I could solder the cables back on the connector, but all the cables were separated from the connector and I can see only the connection for the 'green' wire. This is a non-standard cable and Behringer says the schematic is proprietary.

So, if some kind sole could test continuity on their Behringer foot pedal cable that is flat on one end and looks like midi on the other, that would be great.

The cable looks like midi on one end and is flat on the other. Green is #6 on the midi looking side and is #3 on the flat side.


The piano recital is next week, oh, no!

[img:center]http://behringer-en.custhelp.com/ci/fattach/get/46413/1303590854[/img]

Part# Q71-18006-01807 is reasonable to purchase, but I was quoted $40 for shipping to my location, so I could use some help, Please.
Posted by: Zeph55

Re: Behringer CDP2400USB Pedal Cable Schematic - 05/11/11 05:20 PM

Posted by: Zeph55

Re: Behringer CDP2400USB Pedal Cable Schematic - 07/22/11 11:58 AM

On the 'flat side', pin numbers are: 1 red, 2 Black, 3 Green, 4 Brown. The midi side has pins 1,4,2,5 and 3
So, last night, I connected 3 green to #3, 4 brown to 5 and 2 black to 2 with results of:
The middle pedal only is working. No other combinations would give results. I am calling it a success.